HAMPTON BAY 5284002012 Use And Care Manual page 6

Installation (continued)
3
Connecting the wires and installing
the xture
Connect the ground wire from the junction box to the
□
ground screw on the crossbar. Then connect the ground
wire from the junction box to the ground wire from the
fixture (A).
□ Connect the white wire from the junction box to the white
wire from the fixture (A) by twisting a wire nut (BB) onto
the bare ends of the wires.
□ Connect the black wire from the junction box to the black
wire from the fixture (A) by twisting another wire nut (BB)
onto the bare ends of the wires. Make sure wire
connections are secure.
□ Carefully place the wires into the junction box. Then
secure the fixture (A) by screwing the screws removed in
step 1.
NOTE: The ground wire is green.
BB
A
4
Installing the bulb
□ Rotate the bulb (not included) into the fixture (A).
A
5
Sealing the xture
□ Apply silicone caulking adhesive (not included)
completely around the perimeter of the fixture (A)
where the back meets the mounting surface to
prevent water from seeping into the junction box.
6