Filling The Oil Bath Air Filter; Refueling The Tiller; Refuelling The Tiller; Adjusting The Tiller For The User - Stihl MH 700 Instruction Manual

English
NOTICE
The tiller does not contain any engine oil on delivery.
Starting the engine with no or too little engine oil may
damage the tiller.
► Always check the engine oil level before starting and if
necessary top up.
► Add the engine oil as described in the engine instruction
manual.

6.11 Filling the Oil Bath Air Filter

The oil bath air filter filters the air taken in by the engine.
NOTICE
The oil bath air filter does not contain any engine oil on
delivery. Starting the engine with no or too little engine oil in
the oil bath air filter may damage the tiller.
► Always check the engine oil level in the oil bath air filter
before starting and if necessary top up.
The engine oil specification and capacity can be found in the
engine instruction manual.

7 Refueling the Tiller

7.1

Refuelling the Tiller

NOTICE
The tiller may be damaged if the correct fuel is not used.
► Observe the specifications in the engine instruction
manual.
► Stop the engine.
► Place the tiller on a level surface.
► Open the cover.
► Clean the area around the fuel tank cap with a damp cloth.
62
► Turn the fuel tank cap anti-clockwise until it can be
removed.
► Remove the fuel tank cap.
► Add fuel without spilling any and stop at least 15 mm short
of the fuel tank brim.
► Place the fuel tank cap on the fuel tank.
► Turn the fuel tank cap clockwise and tighten firmly by
hand.
► Close the cover.
The fuel tank is sealed.

8 Adjusting the Tiller for the User

8.1

Adjusting the Handlebar Height

The handlebar can be adjusted to five different height
settings.
► Stop the engine.
► Place the tiller on a level surface.
7 Refueling the Tiller
0478-404-9604-A