Table of Contents
Advertisement
2.4
Connecting the cables
1.
Connect the cables as the following instructions:
•
To connect the power cord: Connect one end of the power cord securely to
the monitor's AC input port, the other end to a power outlet.
•
To connect the HDMI/DisplayPort cable:
a.
Plug one end of the HDMI/DisplayPort cable to the monitor's HDMI/
DisplayPort jack.
b.
Connect the other end of the HDMI/DisplayPort cable to your device's
HDMI/DisplayPort jack.
•
To use the earphone: connect the end with plug type to the monitor's
earphone jack when an HDMI/DisplayPort/Thunderbolt signal is fed.
•
To use the ports:
»
Upstream: Use the supplied USB Type-C to Type-A cable or
Thunderbolt cable and plug the Type-C or Thunderbolt connector to
the monitor's Thunderbolt port as upstream, and the other side (Type-A
or Thunderbolt) to your computer port. Make sure your computer is
installed with the latest Windows 7/Windows 10 operating system. That
will enable the USB ports on the monitor to work.
»
Downstream: Plug the USB Type A cable of your device to the monitor's
USB Type A jack.
»
USB Type-A jack can be used for Color Calibrator.
•
To connect the Thunderbolt cable:
a.
Plug one end of the Thunderbolt cable to the monitor's Thunderbolt jack.
b.
Connect the other end of the Thunderbolt cable to your Thunderbolt
device's jack.
c.
While one Thunderbolt port is plugged, the other Thunderbolt port
outputs DisplayPort signal only.
d.
The port
delivery and the other port
2-4
offers Max. 60W (5V/3A, 9V/3A, 15V/3A, 20V/3A) power
offers 15W (5V/3A).
For service only
Chapter 2: Setup
Advertisement
Table of Contents
