Certification Label; Vehicle Identification Number; Engine Number - Ford 2000 Expedition Owner's Manual

Capacities and specifications
IDENTIFYING YOUR VEHICLE

Certification label

The National Highway Traffic Safety
Administration Regulations require
that a Certification Label be affixed
to a vehicle and prescribe where the
Certification Label may be located.
The Certification Label is located on
the front door latch pillar on the
driver's side.

Vehicle identification number

The vehicle identification number is
attached to a metal tag and is
located on the driver side
instrument panel. (Please note that
in the graphic XXXX is
representative of your vehicle
identification number.)

Engine number

The engine number (the last eight numbers of the vehicle identification
number) is stamped on the engine block and transmission.
234
MFD. BY FORD MOTOR CO. IN U.S.A.
DATE: XXXXX
FGAWR: XXXXXX/XXXXXXX
THIS VEHICLE CONFORMS TO ALL APPLICABLE FEDERAL
MOTOR VEHICLE SAFETY STANDARDS IN EFFECT ON THE
DATE OF MANUFACTURE SHOWN ABOVE.
VIN: XXXXXXXXXXXXXXXXX
MAXIMUM LOAD=OCCUPANTS + LUGGAGE=XXXKG/XXXXLB
OCCUPANTS: X TOTAL X FR X 2ND X RR OCCUPANTS LUGGAGE
TIRE: XXXX/XXXXX XXX
PRESSURE (FR) XXX kPa/33 PSI COLD
PRESSURE (RR) XXX kPa/33 PSI COLD
TRAILER TOWING - SEE OWNER GUIDE
EXT PNT: XXXXXX XXXXXX RC: XX DSO: XXXX F0000
BAR INT TR TP/PS R AXLE TR SPR
X XX XXX X
XXXXXXXXXXXXXXXXX
GVWR:XXXXX LB/ XXXXX KG
RGAWR: XXXXXXX/XXXXXXX
TYPE: XXXXXXXXXXXXXXX
XX XXXKG/XXXXLB
X XXXKG/XXXXLB
T0000
XX X XXXX
UTC FOHT-15294A10-GA