Control Panel - AEG FSE62407P User Manual

3.1 Beam-on-Floor
The Beam-on-Floor is a light that is
displayed on the floor below the
appliance door.
• When the programme starts, a red
light comes on and stays on for the
duration of the programme.
• When the programme is completed, a
green light comes on.
• When the appliance has a
malfunction, the red light flashes.

4. CONTROL PANEL

1 2
On/Off button
1
Delay Start button
2
Display
3
MY TIME selection bar
4
4.1 Display
B
A. ECOMETER
B. Indicators
C. Time indicator
3
A
C B
The Beam-on-Floor is off
when the appliance is
deactivated.
When AirDry is activated
during the drying phase, the
projection on the floor may
not be completely visible. To
see if the cycle has ended,
check the control panel.
4
EXTRAS buttons
5
AUTO Sense button
6
4.2 ECOMETER
The ECOMETER indicates how the
programme selection impacts energy
and water consumption. The more bars
are on, the lower the consumption is.
indicates the most
environmentally friendly programme
selection for a normally soiled load.
ENGLISH
5
7
6