Table of Contents
Advertisement
3.
Press
to correct keystoning at the top of the image or press
keystoning at the bottom of the image.
To correct this automatically, go to the
and select On.
Magnifying and searching for details
If you need to find the details on the projected picture, magnify the picture. Use the
direction arrow keys for navigating the picture.
•
Using the OSD menu
1.
Open the OSD menu and go to the
2.
Press Enter. The Zoom bar is displayed. Use the directional arrows (
enlarge or reduce the picture.
3.
To switch between panning and zoom mode, press Enter. Use the directional arrows
(
,
,
4.
To reduce size of the picture, you can also press Auto Sync on the remote control to
restore the picture to its original size.
This adjustable range may vary depending on different aspect ratios.
The picture can only be navigated after it is magnified. You can further magnify the picture
while searching for details.
Selecting the aspect ratio
The 'aspect ratio' is the ratio of the image width to the image height.
With the advent of digital signal processing, digital display devices like this projector can
dynamically stretch and scale the image output to a different aspect than that of the image
input signal.
To select an image ratio that suits your need (no matter what aspect the source is), you can
follow one of the following steps.
•
Press Aspect repeatedly.
•
Go to the DISPLAY > Aspect Ratio menu and press Enter. Press
aspect ratio to suit the format of the video signal and your display requirements.
About the aspect ratio
1.
Auto: Scales an image proportionally to fit the projector's native resolution in its
horizontal width. This is suitable for the incoming image which is neither in 4:3 nor
16:9 and you want to make most use of the screen without altering the image's aspect
ratio.
2.
4:3: Scales an image so that it is displayed in the center of the screen with a 4:3 aspect
ratio. This is most suitable for 4:3 images like computer monitors, standard definition
TV and 4:3 aspect DVD movies, as it displays them without aspect alteration.
3.
16:9: Scales an image so that it is displayed in the center of the screen with a 16:9
aspect ratio. This is most suitable for images which are already in a 16:9 aspect, like
high definition TV, as it displays them without aspect alteration.
4.
16:10: Scales an image so that it is displayed in the center of the screen with a 16:10
aspect ratio. This is most suitable for images which are already in a 16:10 aspect, as it
displays them without aspect alteration.
DISPLAY >
,
) to navigate the picture.
24
Keystone > Auto V Keystone menu
DISPLAY >
Zoom menu.
to correct
,
) to
/
to select an
Hide quick links:
Advertisement
Table of Contents
