Table of Contents
Advertisement
How to eject the tape
To stop the tape and eject the cassette, press the
"EJECT" button. The tape will eject only when
in the tape mode. The cassette cannot be ejected
when the radio is playing an "AM" or "FM"
station. The system will revert to radio mode
when the cassette is ejected.
Using the Dolby B noise reduction feature
NOTE: Noise reduction system manufactured
under license from Dolby Labs
Licensing Corporation. "Dolby" and
double-D symbol are trademarks of
Dolby Laboratories Licensing
Corporation.
Push the k button to activate. When
activated, the light above the k button will be
illuminated.
Tape error messages
Your cassette tape player is equipped to
diagnose certain problems you may experience.
Error codes are as follows:
TD E1 — Radio tries to change sides of tape 3
times in a 10 second span. Push "EJECT" and
try another tape. If problem persists, refer
problem to qualified personnel for service.
TD E2 — Tape eject failure. Radio tries to eject
tape and it will not eject. Push "EJECT" to eject
tape. If the tape will not eject, refer problem to
qualified personnel for service.
TD E3 — Loading error. Push "EJECT" to eject
tape. Reload tape. If the same error code appears
in the display, try another tape.
158
Hide quick links:
Advertisement
Table of Contents
