Ford 1996 Aspire Manual page 147

Removing and Replacing the Tire
1. Find the jack location near the door of the
tire that you are changing. Position the jack
and turn the handle of the jack clockwise
until the wheel is completely off the ground.
To lessen the risk of personal injury, do
not put any part of your body under the
vehicle while changing a tire. Do not start
the engine when your vehicle is on the
jack. The jack is only meant for changing
the tire.
Jack mounting position
2. Remove the wheel bolts by using the lug
wrench. Never loosen the hub nuts. See the
illustration following Step 1 Preparing to
Change the Tire if you are not sure where to
find the wheel bolts.
3. Replace the flat tire with the spare tire. Keep
the retaining tool in place.
RWARNING
147