Adhesive Vibrator Wire - Sony Xperia ZL Working Instructions

Replacement

4.10 Adhesive Vibrator Wire

Follow the 3.1 – 3.2 Disassembly instructions!
Carry out the Removal as described below!
Prepare a new Adhesive Vibrator Wire.
Carry out the Installation as described below!
Follow the 5.5 – 5.6 Reassembly instructions!
REMOVAL
Use the Front Opening Tool to remove the BtB connector
from the Vibrator and remove the wire from the Vibrator
Adhesive.
Do not damage the components on the PBA Complete!
Gently peel of the Adhesive Vibrator Wire.
INSTALLATION
Place the new Adhesive Vibrator Wire on the PBA Complete
according to marking in PBA Complete.
Connect the BtB Connector from the Vibrator to the PBA
Complete and secure its wires on the Adhesive Vibrator Wire
with your fingers.
1271-7733 Rev 2

Sony Mobile Communications AB – Company Internal
Working Instruction (mech)
20(76)