Re-Assembly
5.2
PBA Complete Assy
Prepare the PBA Complete Assy.
Gently insert the PBA Complete Assy, the right side first.
Do not damage the Flex Films or the wires!
Make sure that the Gasket Proximity does not get
deformed or misplaced during this activity!
When lowered into place, the snap (1) should lock and the
steering (2) must be placed correctly in the PBA Complete's
slot.
Secure its position by with a new Screw 3.0.
Use Bits (JCIS No 0 12 ± 2 Ncm torque).
Do not damage the components on the PBA Complete!
1271-7733 Rev 2
Sony Mobile Communications AB – Company Internal
Working Instruction (mech)
2
1
69(76)