Kettler SHIMANO KS127 Series Translation Of Original Operating Instructions page 177

9 Pull out the outer sleeve end cap from the
counter support on the Postpin interface on the
seat post.
Figure 166: Pulling the end cap out
Removing the outer sleeve and slide bushing
1 Use a 3 mm hex spanner to remove
attachment screw on the outer sleeve.
2 Detach outer sleeve by pulling upwards with
your hand.
3 Pull slide bushing tube out of the seat tube.
Figure 167: Removing the outer sleeve and slide bushing
MY22K03 - 32_1.0_13.09.2021
Caring for the outer sleeve
1 Detach spring washer or outer sealing ring.
Figure 168: Removed spring washer
2 Carefully remove the wiper from the groove.
Figure 169: Removing the wiper
3 Use a small, sharp object to look for and
remove the end of the felt ring.
4 Carefully take out the felt ring.
5 Remove felt ring.
6 Clean or replace felt ring.
Figure 170: Removing the felt ring
7 Clean inside of outer sleeve with a cloth.
Figure 171: Cleaning the outer sleeve
Maintenance
176