Cpu Speed; Chassis Intrusion Detect - MSI MS-6199VA User Manual

CPU Speed

Check your processor and set this function accordingly. If you set
this to Manual, you can set the CPU Ratio and CPU Frequency accordingly.
CPU Frequencies are: 66, 75, 83, 100, 112, 117, 122, 124, 133, 140, 144, 150,
155. Though 75, 83, 112, 117, 122, 124, 140, 144, 150, and 155 frequen-
cies are available, it is advised that you use these only for testing since this
is not stable as the CPU is not designed for these frequencies. CPU ratio
are: 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7, 7.5, or 8.
Note: If you set the CPU Ratio and CPU Frequency to be too high, and the
system will not turn on, then restart the system. Press "F10" until bootup.
This will set the default setting.
Chassis Fan Detected/Power Fan Detected/CPU Fan +2.5V
Detected/Voltage Detected/Vcore Voltage Detected/+2.5V
Voltage Detected/+3.3V Voltage Detected/+5.0 Voltage
Detected/+12V Voltage Detected/-12V Voltage Detected/-5.0
Voltage Detected/VBat Voltage Detected/5VSB Voltage
Detected
During Enabled, this will show the CPU/FAN voltage chart during
system boot up. During Disabled, this will not show.

Chassis Intrusion Detect

Set this option to Enabled, Reset, or Disabled the chassis intrusion
detector. During Enabled, any intrusion on the system chassis will be
recorded. The next time you turn on the system, it will show a warning
message. To be able to clear those warning, choose Reset. After clearing
the message, it will go back to Enabled.
3-30
®