Chevrolet 2007 Equinox Owner's Manual page 379

To replace one of these bulbs, do the following:
1. Open the liftgate. See Liftgate on page 107
for more information.
2. Remove the taillamp
screw covers and
then remove the
two screws.
4. Turn the bulb socket counterclockwise to
disconnect it from the taillamp assembly.
5. Pull the bulb out of the bulb socket.
6. Push the new bulb into the bulb socket.
7. Insert the bulb socket into the taillamp housing
and turn it clockwise to secure.
8. Reverse Steps 2 and 3 to reinstall the taillamp
assembly.
3. Carefully slide the
taillamp assembly
outward to clear the
stud (see arrow)
and then rearward
and away from
the body of
the vehicle.
379