Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Airzone Lutron
Summary of Contents for Airzone Lutron
- Page 1 Installation Manual...
-
Page 2: Table Of Contents
System identification........................................5 Configuration ............................................6 Configuration modes with Lutron systems ................................6 Configuration with Lutron Palladiom thermostat to control the HVAC zone ..................6 Configuration with Airzone thermostat ................................6 Lutron Configuration ........................................7 Airzone system Configuration ....................................8 System configuration for ACUAZONE / IBPRO32 and FLEXA 3.0 / IBPRO6 ..................... -
Page 3: Overview
Reading/Writing of the fan speeds. The system requires the connection of at least one Airzone Blueface Thermostat. It allows the control of the conditioning of each zone associated from Lutron Keypads devices, and the control of time schedules both from the HomeWorks QS Processor and from the Lutron Connect App. -
Page 4: Specifications And Elements Of The Airzone-Lutron Interface
SPECIFICATIONS AND ELEMENTS OF THE AIRZONE-LUTRON INTERFACE Ethernet Power supply and consumption Type of power supply Vac Type of cable UTP cat 6 Standard T568B 12 V supplied from V max. the Control Board IP address setting Static I max. 200 mA Mechanical aspects Maximum consumption 1.8 W... -
Page 5: Installation
Note: The HomeWorks QS Processor and the Palladiom thermostat must use software version 13.0 or newer. The Airzone-Lutron interface is a Plug&Play device which, when connected to the Airzone Main Control Board and to the HomeWorks QS Processor via Ethernet using the Lutron integration protocol, configures itself and configures the Main Board to work with the Lutron system. -
Page 6: Configuration
01 for Airzone system 1, 02 for Airzone system 2... Up to 32 Airzone systems. 01 for Airzone zone 1, 02 for Airzone zone 2... Up to 32 Airzone zones per system (based on the type of the system). Example: A Palladiom thermostat DEVICE Integration ID for the Airzone system 1 and for zone 1 will be 20101. -
Page 7: Lutron Configuration
LUTRON CONFIGURATION To perform the integration with the Airzone system in the HomeWorks QS software, please follow the steps below: Define the HVAC zones in the software in the menu design – loads and select HVAC zones. Important: On zoned ducted units the Fan Speed option enabled must be Auto. The “Auto” Operating Mode is only available for Airzone systems in North America. -
Page 8: Airzone System Configuration
IDs of the HVAC zones in the format 1XXYY as described on page 6. While still in the Configure Integration screen, select the tab “Telnet Logins”. Add the Username and Passphrase the Airzone-Lutron interface will use to make a Telnet connection with the HomeWorks QS processor. AIRZONE SYSTEM CONFIGURATION System configuration for ACUAZONE / IBPRO32, FLEXA 3.0 / IBPRO6 and RADIANT365... -
Page 9: System Configuration For Vaf And Zbs
“airzone” and the pass “lutron” in the access pop-up window. Next, set the Username and Passphrase to match those created in the HWQS software in step 6 as described on page 8. In the Lutron IP Gateway field, enter... -
Page 10: Troubleshooting
Verify the following items: The D9 LED (Microswitch performance) is blinking. The D7 and D8 LEDs are alternately blinking. The correct connection between the Airzone-Lutron Interface in the Airzone Main Control Board. THE AIRZONE-LUTRON INTERFACE CANNOT BE CONNECTED Verify the following items: LEDs “A”... - Page 11 Parque Tecnológico de Andalucía Parc Tertiaire Silic – Inmeuble Panama C/ Marie Curie, 21 – 29590 45 Rue Villeneuve Via Fabio Filzi, 19/E – 20032 Campanillas – Málaga - España 94573 Rungis - France Cormano – Milano - Italia Teléfono: +34 900 400 445...
Need help?
Do you have a question about the Lutron and is the answer not in the manual?
Questions and answers