Advertisement
On
Right
Of f
Interface
Reset
P1
P2 (Lef t )
P2 (Right )~P4
P5~P6
USB1~2
Note 1
P1 t o P4 port can be conf igurable as WAN / LAN int erf ace. At least , up
t o t wo of t hem can be set as t he WAN port at one t ime.
For Vigor2962P, P1, P4, P5 and P6 also can be connect ed by PoE
equipment s.
Note 2
The PoE Power budget is up t o 60W.
The Et hernet link is est ablished on
corresponding port wit h 1Gbps.
The Et hernet link is est ablished on
corresponding port wit h less t han 1Gbps.
Description
The Fact ory Reset but t on is used t o rest ore t he def ault
set t ings. Turn on t he rout er (ACT LED is blinking). Press
t he hol e and keep f or more t han 5 seconds. When you see
t he ACT LED begins t o blink rapidly t han usual, release t he
but t on. Then t he rout er will rest art wit h t he f act ory
def ault conf igurat ion.
Connect or f or local net work devices (LAN) or a modem f or
accessing Int ernet (WAN).
Connect or f or SFP module wit h t he rat e of 1G bps.
Connect ors f or remot e net work devices or local net work
devices (WAN/ LAN) wit h t he rat e of 1G/ 100M/ 10M bps.
Or connect or f or a modem f or accessing Int ernet (WAN).
Connect ors f or local net work devices (LAN) wit h t he rat e
of 1G/ 100M/ 10M bps.
Connect or f or t he USB device.
Connect or f or a power cord.
ON/ OFF - Power swit ch.
3
Advertisement
