Shift Speeds - Chevrolet 2005 Cobalt Owner's Manual

Hide thumbs Also See for 2005 Cobalt:
Table of Contents

Advertisement

NEUTRAL: Use this position when you start or idle
your engine.
REVERSE (R): To back up, press down the clutch
pedal and shift into REVERSE (R). Let up on the clutch
pedal slowly while pressing the accelerator pedal.
Notice: Shifting to REVERSE (R) while your vehicle
is moving forward could damage the transaxle.
The repairs would not be covered by your warranty.
Shift to REVERSE (R) only after your vehicle is
stopped.
Also, use REVERSE (R), along with the parking brake,
for parking your vehicle.

Shift Speeds

CAUTION:
{
If you skip a gear when you downshift, you
could lose control of your vehicle. You could
injure yourself or others. Don't shift down more
than one gear at a time when you downshift.
2-24
Up-Shift Light
United States Only
When this light comes on, you can shift to the next
higher gear if weather, road and traffic conditions let you.
For the best fuel economy, accelerate slowly and shift
when the light comes on.
While you accelerate, it is normal for the light to go on
and off if you quickly change the position of the
accelerator. Ignore the light when you downshift.
If you have a manual
transaxle, you have an
up-shift light. This light will
show you when to shift
to the next higher gear for
the best fuel economy.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents