Chevrolet 2005 Cobalt Owner's Manual page 205

Tire and Loading Information Label
Label Example
A vehicle specific Tire and Loading Information label is
attached to the vehicle's center pillar (B-pillar). With
the driver's door open, you will find the label either
attached above the door lock post for a two door vehicle
or below the door lock post for a four door vehicle.
The tire and loading information label shows the number
of occupant seating positions (A), and the maximum
vehicle capacity weight (B) in kilograms and pounds.
The Tire and Loading Information label also shows the
tire size of the original equipment tires (C) and the
recommended cold tire inflation pressures (D). For more
information on tires and inflation see Tires on page 5-54
and Inflation - Tire Pressure on page 5-61.
There is also important loading information on the
Certification label. It tells you the Gross Vehicle Weight
Rating (GVWR) and the Gross Axle Weight Rating
(GAWR) for the front and rear axle; see "Certification
Label" later in this section.
Steps for Determining Correct Load Limit
1. Locate the statement "The combined weight
of occupants and cargo should never exceed
XXX kg or XXX pounds" on your vehicle placard.
2. Determine the combined weight of the driver and
passengers that will be riding in your vehicle.
3. Subtract the combined weight of the driver and
passengers from XXX kilograms or XXX pounds.
4-31