AM-NX1
3-4.
UPPER PANEL SUB ASSY
2 two screws
(M1.4)
1 Slide the knob (open) and
open the upper panel sub assy.
3-5.
ORNAMENTAL BELT ASSY
2 Open to the direction
of the arrow C
and remove two bosses D
and convex part E .
5 ornamental belt assy
Note: As the ornamental belt assy is
very fragile, do not give an excessive force
to the entire assy when removing it.
8
C
A
convex part E
boss D
4 three convex parts
4 upper panel sub assy
3 two screws
1 Pull to the direction of the arrow A
and remove two bosses B .
convex part H
A
F
3 Open to the direction
boss B
(M1.4)
of the arrow F
and remove two bosses G
and convex part H .
boss B
boss G