Bottom (Ce) Panel Sub Assy; Main Board - Sony AM-NX1 Service Manual

Note: Follow the disassembly procedure in the numerical order given.
3-2.

BOTTOM (CE) PANEL SUB ASSY

1 Slide to the direction of the arrow,
open the battery case lid.
2 battery case lid.
3-3.

MAIN BOARD

1 sheet (radiation B)
2 Remove the solder
of terminal board (minus).
4 Remove two solders of flexible board
from OP service assy.
3 two screws (M1.4)
6 bottom (CE) panel sub assy
5 flexible board
(CN701)
3 Remove the solder
of battery terminal (plus) assy.
6 flexible board
(CN501)
5 two screws (M1.4)
4 screws (M1.4)
8 main board
7 three toothed lock screws
(M1.4)
AM-NX1
7