Looking Up The Notes Of Chords (Chord Book - Casio CT-X870IN User Manual

5.
Press br A.HAR./ARPEG. to turn on
Arpeggiator.
Playing a chord on the keyboard will start arpeggio play.
• Press br A.HAR./ARPEG. again to turn off
Arpeggiator.
Lit when on
• The tempo setting of the Arpeggiator is the same as that set
for the metronome (page EN-10).
• While "Arp Type" is shown on the display, long-press the
br A.HAR./ARPEG. to assign the recommended tone for
the selected type.
Sustaining an Arpeggio (Arpeggiator Hold)
Use the following procedure when you want an arpeggio
pattern to keep playing after you release the keyboard keys.
See Function No.18 under "FUNCTION Button (cs)
Functions" (page EN-43).
Looking Up the Notes of
Chords (Chord Book)
You can use the Chord Book to look up chords that you do not
know how to play. Specifying root, chord type, and inversion
settings causes the chord form to appear on the display and
sounds the chord. You can also sound Auto Accompaniment
based on the looked up chord, or play Auto Accompaniment
and have the chords that are played displayed by the chord
book.
1.
Hold down bq CHORD MODE until the
message "Root" appears on the display.
R o o t
2.
Specify the root note of the chord you want to
look up by using the dk [–] and [+] keys, or by
pressing the root input keyboard key that
corresponds to the root note.
Example: To look up C
Root note
C
3.
Use the ct [2] (o) and [3] (p) keys to
display "Type".
T
Root input keyboard
e
y p
EN-35