Casio CT-X870IN User Manual page 15

Controlling the Keyboard Sounds
To split the keyboard between two different
tones
1.
Select the tone for the right side range (page
EN-12).
Press bl TONE and then use the ct number keys, and
the dk [–] and [+] keys to select the tone you want.
Example: 255 FLUTE
F l u t e
2.
Press co SPLIT.
3.
Use the ct number keys, and the dk [–] and [+]
keys to select the left side range tone you
want.
Example: 044 VIBRAPHONE 1
V i b e s 1
EN-14
Lights
4.
Play something on the keyboard.
This will sound the tones assigned to the left and right
side ranges of the keyboard.
VIBRAPHONE 1
Split point
F3
• Pressing co SPLIT again will turn split off.
• If you turn on both layer and split, layering will be applied to
the right side range of the keyboard only.
To change the split point
1.
Keep co SPLIT depressed until you finish step
2 of this procedure.
This will cause the key name at the currently set split
point to appear on the display.
2.
Press the keyboard key where you want the
split point to be.
The key you press will become the lowest note of the
right side range of the split keyboard.
Example: Setting middle C (C4) as the split point.
Key name
C 4
FLUTE