Page 1
Cover PX - S7000 USER’S GUIDE Initial Setup Preparing a Power Turning Power On or Off Using Pedals Using Commercially Supply Available Headphones Playing the Digital Piano Playing Notes with Sounding Two Different Splitting the Keyboard Using the Metronome Different Tones Tones at the Same Time Between Two Tones (Layer)
Page 2
• The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by CASIO COMPUTER CO., LTD. is under license. Other trademarks and trade names are those of their respective owners.
Page 3
Use of unauthorized accessories creates the risk of fire, electric shock, and personal injury. • You can get information about accessories that are sold separately for this product from the CASIO catalog available from your retailer, and from the CASIO website. https://support.casio.com/global/en/emi/manual/PX-S7000/...
Overview and Setup General Guide ■ Front Panel bl ENTER button button (Power) bm EXIT button 2 Volume knob 3 LED (Red, White) bn Touch ring bo PIANO button 4 a button bp E. PIANO button 5 0REC button 6 FUNCTION button bq OTHERS button 7 F1 button br Display...
Page 10
Overview and Setup Touch Buttons and Touch Ring Turning on Digital Piano power causes all of the touch buttons (4 to bm, bo to bq) and the touch ring (bn) to light. The above illustration shows when all buttons are lit. During actual operation, only the buttons that are currently enabled are lit or flashing.
Page 11
Overview and Setup ■ Display (Top Screen) The top screen is the screen that appears on the display when the Digital Piano is turned on. Part name, Tone number Indicators Tone name F Button Set name ...
Overview and Setup Touch Operation and Notation Used in this Guide ■ Touch Ring Operation and Notation This operation is shown like this Touch and immediately release the top, bottom, left or right edge of the touch ring Touch top, bottom, left or right on the touch ring.
Overview and Setup Preparing a Power Supply The Digital Piano can be powered by an AC adaptor or AA batteries (alkaline or rechargeable nickel- metal-hydride). Using an AC Adaptor Use only the AC adaptor (JEITA Standard, with unified polarity plug) that comes with this Digital Piano. Use of a different type of AC adaptor can cause malfunction of the Digital Piano.
Page 14
Overview and Setup ■ Disconnect Protection Precautions (1) Never pull on the cord with excessive force. (2) Never repeatedly pull on the cord. (3) Never twist the cord at the base of the plug or connector. (4) Loop and bundle the power cord, but never wind it around the AC adaptor. (5) Before moving the Digital Piano, be sure to unplug the AC adaptor from the power outlet.
Overview and Setup Using Batteries • Be sure to turn off power before loading batteries. • Use commercially available AA-size alkaline batteries or AA-size eneloop rechargeable batteries. • Low battery power can cause abnormal operation. If this happens, replace batteries with new ones.
Page 16
Overview and Setup ■ To load batteries Open the battery cover on the bottom of the Digital Piano. Load eight AA-size batteries into the battery compartment. • Load batteries with their positive + and negative - ends facing correctly. Insert the tabs of the battery cover into the holes along the side of the battery compartment, and close the cover.
Page 17
Overview and Setup ■ To select the Battery Type Select the battery type that matches the battery installed in this Digital Piano’s battery case. Touch the FUNCTION button. The FUNCTION menu appears. Touch the top or bottom of the touch ring to select “SYSTEM” and then touch the ENTER button.
Page 18
Overview and Setup ■ Low Battery and Replace Battery Notifications A battery icon appears on the display to let you know when battery power is getting low. Low Battery Indicator Low battery icon (not flashing) Replace Battery Indicator Replace battery icon (flashing) •...
Overview and Setup Turning Power On or Off Before turning on the power, turn the volume knob to the position shown below. Press the P (Power) button to turn on the Digital Piano. When the power is turned on, “Welcome” appears on the display. •...
Overview and Setup Auto Resume When the Digital Piano is turned off, various settings such as tone numbers are reset. If “SYSTEM” > “Auto Resume” is set to “On” in the FUNCTION menu (page EN-33), most settings will be retained even when the power is turned off.
Overview and Setup Power On Alert and Illumination Effect The “Power On Alert” function is a feature of the Digital Piano that is activated when the power is on but the Digital Piano has not been used for approximately six minutes. The “illumination effect” is an effect that is activated when the Power On Alert is active.
Overview and Setup Panel Lights Off While the top screen (the screen that appears immediately after the power is turned on) is displayed, touching and holding the EXIT button until the light of the touch ring goes around once and then goes out will turn off most of the lights on the front panel, except the FUNCTION button and touch ring (the state the panel lights off).
Overview and Setup Using Commercially Available Headphones Using headphones cuts off output from the built-in speakers, which means you can practice playing even late at night without disturbing others. • Be sure to turn down the volume level before connecting headphones to the PHONES jack. PHONES jacks (Top: stereo mini phone jack (Mini TRS phone)/ Bottom: stereo standard phone jack (TRS phone))
Overview and Setup Headphone Mode When “SYSTEM” > “Headphone Mode” in the FUNCTION menu (page EN-33) is set to “On” (the initial default setting) and headphones are used, the sound quality is automatically corrected to reproduce how an acoustic piano would sound when it naturally reaches the ears of a listener. •...
Overview and Setup Operation Lock When Operation Lock is enabled (“On” or “Auto”), all button operations except the P (Power) button and the Operation Lock release operation are disabled to prevent accidental operation during a performance. Touch the FUNCTION button. The FUNCTION menu appears.
— — — Audio through external speakers or Equipment audio equipment (LINE OUT jacks)” (page EN-157) *1 Using the included Wireless MIDI & Audio Adaptor. *2 Use with apps other than CASIO’s dedicated app is not guaranteed to work. EN-23...
Overview and Setup Using the Included Wireless MIDI & Audio Adaptor ® To pair this Digital Piano with a Bluetooth wireless technology-capable external device, you need to plug the Wireless MIDI & Audio Adaptor into the Digital Piano’s USB Type A port. USB Type A port Wireless MIDI &...
Operations Common to All Modes • Unless otherwise specifically noted, all of the procedures in this manual assume that the Digital Piano is in its initial power on state (immediately after you turn on power). If you run into problems with a procedure, turn Digital Piano power off and back on, and then try performing the procedure again.
Operations Common to All Modes • For an example of a specific operation using the touch ring, see “Basic Operation for Contents of the Display” (page EN-27). • To reset the value of the item currently selected on the screen to its initial default value, touch and hold the FUNCTION button and touch the top, bottom, left, or right of the touch ring.
Operations Common to All Modes Basic Operation for Contents of the Display Selecting Operation Items The dots ( ) shown on the display of the Digital Piano indicate items that can be used with the touch ring or ENTER button. −...
Page 31
Operations Common to All Modes Touch the top or bottom of the touch ring. Each touch of the touch ring moves the cursor ( ) between the dots. Move the cursor ( ) to the item whose value you want to change. For example, move the cursor ( ) to “Part name and tone number”.
Page 32
Operations Common to All Modes ■ Close-Up Screen If the setting of “SYSTEM” > “Close-up” in the FUNCTION menu (page EN-33) is changed from “Off” (default value) to “On”, the display will show a “close-up screen” that magnifies the value whenever you trace along the touch ring to change a value.
Operations Common to All Modes Navigating the Hierarchy of Setting Items Use the settings list screen to select from many options for tones, functions, or specific settings. The following is a schematic for navigating the hierarchy of setting items and for the sequence of operations when selecting categories, setting values, etc.
Operations Common to All Modes • Touch and hold the EXIT button to return to the top screen. • The description of each operating procedure in this manual omits the step of returning to the first screen using the EXIT button at the end of each procedure. The F Button Menu and FUNCTION Menu Using the F Button Menu The F button menu shown at the bottom of the display represents the functions that will be activated...
Page 35
Operations Common to All Modes ■ To change the F Button Set Touch the top or bottom of the touch ring on the top screen to move the cursor ) to the F Button Set row. Touch the left or right or trace along the touch ring. The F Button Set changes and the content of the F button menu changes, as well.
Operations Common to All Modes Using the FUNCTION Menu Touch the FUNCTION button to display the FUNCTION menu. This menu can be used to access most of the functions and settings of the Digital Piano. ■ FUNCTION Menu Operation Example As an example, this section describes how to change the “Hammer Response”...
Page 37
Operations Common to All Modes ) to “KBD SETTING”, and then touch the ENTER (2) Trace the touch ring to move the cursor ( button. (3) Move the cursor ( ) to “Hammer Response” by touching the top or bottom of the touch ring. (This time, it is not necessary to touch the ENTER button.) Change the value.
Operations Common to All Modes Text Character Input Use the procedure below when you need to change the name of Registration Bank (page EN-81), F Button Set (page EN-94), data saved on a USB flash drive or to input or edit other text (page EN-137).
Page 39
Operations Common to All Modes • The characters shown in the table below are supported for file names on an exFAT formatted USB flash drive. & (First cell in the above table is blank.) • The characters shown in the table below are supported for file names on a FAT 32 formatted USB flash drive.
Page 40
Operations Common to All Modes ■ To save edited text Touch the ENTER button on the text editing screen. A confirmation screen appears. To return to the text editing screen and continue editing, touch the left (NO) of the touch ring. To save your edits, touch the right (YES) of the touch ring.
Acoustic Settings for the Digital Piano and Playback of the Demo Songs Selecting the Piano Position Setting You can select the acoustic settings appropriate for the Digital Piano’s location. Select “04 Listening” of the F Button Set. See “To change the F Button Set”...
Acoustic Settings for the Digital Piano and Playback of the Demo Songs Listening to the Demo Songs Follow the steps below to play back the built-in demo songs in sequence. Select the “01 Standard” of the F button set. See “To change the F Button Set”...
Page 43
Acoustic Settings for the Digital Piano and Playback of the Demo Songs To start the demo song, touch the a button. • Each time the a button is touched after this, the demo song is stopped or resumed. To return to the top screen, touch the EXIT button. •...
Playing Notes with Different Tones Selecting a Single Tone This Digital Piano has many tones available. Choose your favorite tone and play it. • For details about tone categories and the names of tones included in each category, refer to the separate “Built-in Music Data Lists”.
Playing Notes with Different Tones Selecting a Tone by Category Touch the top or bottom of the touch ring on the top screen to move the cursor ) to the part name and tone number. Touch the ENTER button. A list of tone category names is displayed. Use the touch ring to select a tone category then touch the ENTER button.
Playing Notes with Different Tones Selecting a Tone with the F Buttons Select the “07 Piano Collect” or “08 E.PianoCollect” of the F button set. See “To change the F Button Set” (page EN-32). Touch one of the F1 to F4 buttons, to select the tone you want. •...
Playing Notes with Different Tones Sounding Two Different Tones at the Same Time (Layer) As shown in the figure below, by assigning different tones to the “Upper 1” and “Upper 2” parts, two tones can be played simultaneously when the keyboard is played. This feature is called “Layer”. When Layer is turned on, both the Upper 1 and Upper 2 parts sound simultaneously.
Playing Notes with Different Tones Touch the F4 button (LAYER). Layer is turned ON and the indicator appears on the display. Part name: U2 (Upper 2) Displayed when Layer is on Perform the operation described in “Selecting a Single Tone” (page EN-41) operation to select the Upper 2 tone.
Playing Notes with Different Tones Splitting the Keyboard Between Two Tones (Split) By assigning a “Lower” part to the lower range of the keyboard (as shown in the figure below), the lower range and upper range of the keyboard can play different tones. This function is called “Split”. With Split turned on, you can do the following.
Playing Notes with Different Tones Perform the operation described in “Selecting a Single Tone” (page EN-41) operation to select the lower range tone (Lower tone). • To use both SPLIT and LAYER at the same time, perform steps 3 to 4 of the above operation following the operation described in “Layering Two Tones”...
Playing Notes with Different Tones Changing Part Settings (Volume Level, Octave Shift, Tuning, etc.) You can change the volume, octave shift, tuning, and other settings for the Upper 1 and Upper 2 parts when using Layer (page EN-44), and the Lower part when using Split (page EN-46), individually for each part.
Applying Effects Using the Sound Mode Effects (Hall Simulator/Reverb and Surround) The “Sound Mode” of this Digital Piano includes the following effects. • Hall Simulator/Reverb Hall Simulator and Reverb are both effects that change the reverberation of the sound. The hall simulator effect simulates the rich clarity, unconstrained brilliance, Hall Simulator and other distinctive acoustic characteristics of world-famous concert halls and structures.
Applying Effects Specifying the Hall Simulator/Reverb Type Before selecting a Hall Simulator/Reverb type, make sure to enable the Hall Simulator/Reverb. For details, see “Enabling or Disabling the Hall Simulator/Reverb and Surround Effects” (page EN-49). • The “SOUND MODE” screen shown in step 2 can also be displayed by touch and hold the F button to which “SMODE “...
Applying Effects Adjusting the Depth of the Hall Simulator/Reverb Effect The mixer can be used to individually adjust the Hall Simulator/Reverb for each part (Upper 1/Upper 2/ Lower), audio input from the MIC IN jack, etc. For more information, see “Using the Mixer”...
Applying Effects Using Chorus (Chorus, Flanger, Short Delay) The chorus effect thickens the sound. Changing the Chorus Type This Digital Piano has a preset chorus effect assigned to each tone, but you can select a different type by following the operation below. Select the “09 Favorite Piano”...
Applying Effects Adjusting Brilliance Brilliance is an effect that adjusts the brightness of a sound. • The brilliance effect is applied to the entire sound output from the Digital Piano. Select the “09 Favorite Piano” of the F button set. See “To change the F Button Set”...
Applying Effects Adjusting Acoustic Piano Sound Characteristics (Acoustic Simulator) The piano tones of this Digital Piano include elements characteristic of the sound of an acoustic piano. Follow the procedure below to adjust them. Select the “09 Favorite Piano” of the F button set. See “To change the F Button Set”...
Applying Effects List of Acoustic Piano Sound Setting Items Setting Items Description String Resonance. Playing on an acoustic piano causes the strings String Reso. that are harmonics of the played strings to resonate. You can use this setting item to adjust the level of resonance. Damper Resonance.
Applying Effects Using Microphone Effects Various effects can be applied to the audio from a microphone connected to the MIC IN jack. In addition to the 25 preset types, you can change the effect settings to your liking. • You can also adjust settings for the volume, stereo pan, and Hall Simulator/Reverb applied to audio input from the MIC IN jack.
Applying Effects Specifying the Microphone Effect Type Select the “05 Song Play” of the F button set. See “To change the F Button Set” (page EN-32). Touch and hold the F4 button (MICFX). The “MIC FX” screen appears. Touch the ENTER button to display the “MIC FX TYPE” screen. Use the touch ring to select the type of microphone effect.
Applying Effects Changing Microphone Effect Settings The microphone effect is made up of three modules (M1 to M3) as shown in the figure below. Sound Source Output • Each module contains different effects (equalizer, delay, limiter, etc.). • Each type of microphone effect has a specific set of effects in each module. For more information, “Microphone Effect Type List”...
Page 62
Applying Effects Use the touch ring to select the module (from “M1” to “M3”) whose settings you want to change, and touch the ENTER button. A list of parameters for the effect in the selected module is displayed. • “Bypass” is common to all modules. Set to “On” if you do not want to use the effect in the currently displayed module.
Using the Mixer The mixer allows you to individually adjust the volume, stereo pan, and effects for each part (Upper 1/ Upper 2/Lower) and audio input from the MIC IN jack. Adjusting the Volume Level, Stereo Pan and Effects for Each Part Select the “04 Listening”...
Using the Mixer List of Mixer Setting Items Parameter Setting items Description Range of values Category Adjusts the overall volume of the Upper 1, KB Group Upper 2, and Lower parts while maintaining their relative volumes. U1 Part Adjusts the individual volume of the Upper 1, U2 Part Upper 2, and Lower parts.
Changing the Sound During a Performance Using Pedals This Digital Piano is equipped with two jacks for pedal connections. Pedals can be connected to both jacks and used at the same time. Jack Connectable Pedal Included or separately available pedal unit PEDAL UNIT (three pedals: damper, soft, and sostenuto) Commercially available expression pedal, separately available...
Changing the Sound During a Performance EXPRESSION/ASSIGNABLE jack Use the EXPRESSION/ASSIGNABLE jack to connect a commercially available expression pedal or a separately available sustain pedal. ■ Connectable Expression Pedals • Maximum resistance value: 10kΩ±20% to 50kΩ±20% • Use of a pedal whose operation has been confirmed (see below) is recommended. Operation Confirmed Pedals (Polarity Type 2 Roland EV-5 (Set minimum volume to 0.) KURZWEIL CC-1...
Page 67
Changing the Sound During a Performance ■ To specify the pedal function Display the “EXP/ASGN. PEDAL” screen by performing the procedure under “To specify the pedal type” (page EN-63) and change the value of the “Pedal Target” setting. The following setting values are for the expression pedal only: “Expression”, “Master Vol”, “Tempo”, and “LY Balance”.
Page 68
Changing the Sound During a Performance ■ Expression Pedal Calibration When connecting an expression pedal to the EXPRESSION/ASSIGNABLE jack for the first time, perform calibration (adjustment) as follows. Connect an expression pedal to the EXPRESSION/ASSIGNABLE jack. Select the “13 KB Setting” of the F button set. See “To change the F Button Set”...
Changing the Sound During a Performance Enabling/Disabling the Pedal Operation for Each Part (Upper 1/Upper 2/ Lower) Touch the FUNCTION button to display the FUNCTION menu. Use the touch ring to select “PEDAL/WHEEL” then touch the ENTER button. Select from the menu the jack to which the pedal whose settings you want to change is connected.
Each press of the EX1 button toggles the arpeggiator (page EN-77) on and off. Press the EX2 button to call up the functions of the “CASIO MUSIC SPACE” (page EN-149) application for smart devices.
Page 71
Arpeg On/Off Toggles the arpeggiator (page EN-77) on/off. Calls up the functions of the app for smart devices “CASIO MUSIC SPACE” (page EN-149). For more information on what functions can be assigned to the EX buttons, refer to the user manual for the app.
Changing the Sound During a Performance Using the CONTROL Button This button is used to control the sound while playing. Under initial default settings, modulation is applied while the CONTROL button is held down. By changing the setting, other functions can be assigned, such as switching portamento (an effect that smoothly glides between notes) on and off.
Page 73
Changing the Sound During a Performance If “Control Assign” is set to “Modulation”, change the modulation settings as necessary. • Touch the top or bottom of the touch ring to set each item, such as “Mod Value”. For more information, see “To change the Modulation settings”...
Changing the Sound During a Performance ■ To change the Modulation settings The settings shown in the table below, which appear in the “CONTROL” screen of “Selecting the Function Assigned to the CONTROL Button” (page EN-69), can be used to change the settings when modulation is assigned to the CONTROL button.
Changing the Sound During a Performance Using the Pitch Bend Wheel By moving the pitch bend wheel up and down, the pitch of the currently sounding notes can be smoothly raised or lowered, producing an effect similar to saxophone or electric guitar pitch bending techniques.
Changing the Sound During a Performance Enabling/Disabling the Pitch Bend Wheel Operation for Each Part (Upper 1/ Upper 2/Lower) Display the “WHEEL” screen by performing the operation under “Changing the Pitch Bend Range” (page EN-72) then adjust the settings below. Setting item Values Description...
Using the Metronome The Digital Piano’s metronome can play a variety of drum patterns in addition to a standard metronome sound. Starting or Stopping the Metronome While touching the FUNCTION button, touch the a button. The metronome starts. • The red and white LEDs to the left of the a button will flash in time with the metronome beat (first beat: red;...
Page 78
Using the Metronome Setting item Setting value and description If “Guide Type” is “Metronome”: Sets the metronome’s beat. Bell Off Plays a click sound on every beat. 1 Beat Plays a bell sound on every beat. Sets the number of beats between 2 and 9. Pattern 2 Beat to 9 Beat Plays a bell sound on the first beat and a...
Page 79
Using the Metronome ■ Drum Pattern List Drum Pattern Name Beat Description 8 Beat 1 Simple 8-beat rhythm 8 Beat 2 Simple 8-beat rhythm 8 Beat Shuffle 8-beat shuffle rhythm Triplet8Beat 1 Triplet 8-beat rhythm Triplet8Beat 2 Triplet 8-beat rhythm 6/8 Pop 6-beat rhythm for slow tempo 16 Beat...
Using the Arpeggiator The Arpeggiator automatically plays arpeggios (broken chords) and various other patterns with a single press of the keys. There are many types to choose from, including patterns that play arpeggios from chords being played and many more. Enabling or Disabling the Arpeggiator Select the “12 Control”...
Page 81
Using the Arpeggiator Touch the top or bottom of the touch ring to select the setting you want to change. • The table below shows the setting items, values and descriptions of each. Setting item Values Description Pattern Selects the pattern the Arpeggiator will play. When “On”, the Digital Piano automatically applies the recommended tones and settings for Recommended Setup...
Saving and Recalling Performance Setups (Registration) The state of various settings such as tone selection, Layers, Splits, and effects can be registered as a performance setup. Registered settings can also be recalled together simultaneously. This function is called “Registration”. * By using it with the Freeze function (page EN-83), it is possible to recall only a portion of the registered settings.
Saving and Recalling Performance Setups (Registration) Saving a Setup Registration Set as many tones, effects, and other registrable items (page EN-86) as you need. Select the “02 Regist Setting” of the F Button Set. See “To change the F Button Set”...
Saving and Recalling Performance Setups (Registration) Touch one of the F buttons (F1 to F4) to select the destination (REG 1 to REG 4). A confirmation screen appears. To exit the operation without saving, touch the left of the touch ring (NO).
Saving and Recalling Performance Setups (Registration) Recalling a Setup Registration Select the bank of the setup you want to recall by performing Steps 2 through 4 “Saving a Setup Registration” (page EN-80). • This procedure is not necessary if you want to recall the registration from the currently selected bank.
Saving and Recalling Performance Setups (Registration) Freeze Function By turning on the Freeze function, you can prevent certain setting items from being changed when the registration is recalled. Use the following procedure to select which setting item to freeze. ■ To select freeze items Select “02 Regist Setting”...
Saving and Recalling Performance Setups (Registration) Using a Pedal or an EX button to Cycle Through Multiple Setup Registrations (Sequential Recall) Registrations can be sequentially recalled using a pedal connected to the EXPRESSION/ ASSIGNABLE jack or one of the EX buttons. ■...
Page 88
Saving and Recalling Performance Setups (Registration) ■ To use an EX button to cycle through multiple setup registrations Refer to “To select freeze items” (page EN-83) to switch the “EX/CTRL” setting to “On”. Refer to “To enable or disable freeze” (page EN-83) to turn on the Freeze function.
Saving and Recalling Performance Setups (Registration) Registration Memory Data Setting Items Freeze • Pedal unit, EXPRESSION/ASSIGNABLE pedal, and pitch bend wheel Part On/Off settings Pedal/Wheel • EXPRESSION/ASSIGNABLE pedal functions • Pitch Bend Range • EX Button settings • Sustain setting by EX button operations •...
Saving and Recalling Performance Setups (Registration) Saving to an External Device Registration data can be saved to a USB flash drive as banks. For more information, see “Saving Digital Piano Data to a USB Flash Drive” (page EN-137). EN-87...
Using the F Button Set A set of four F buttons, each assigned a function, is called an F Button Set. There are 14 preset F Button Sets that have predefined names and functions and 16 user F Button Sets that the user can freely assign names and functions to.
Using the F Button Set Editing an F Button Set Assigning a Function to an F Button (Creating a User F Button Set) There are two ways to assign desired functions to F buttons, creating a user F Button Set: •...
Page 93
Using the F Button Set Trace the touch ring to change the setting value for the F1 button. • For details on the displayed settings and the corresponding functions, see “F Button Function List” (page EN-97). • To assign a tone to an F button, you must change the setting value to “Tone Category” and touch the ENTER button to select a tone.
Page 94
Using the F Button Set Trace the touch ring to select a user F Button Set as the save destination then touch the ENTER button. After “Complete” appears, the display returns to the top screen. [Example 2]: Assigning new functions to an empty user F Button Set and saving it Select an empty user F Button Set.
Page 95
Using the F Button Set Trace the touch ring to change the desired setting. • For more information on the displayed settings and the assignable F button functions corresponding to those settings, see “F Button Function List” (page EN-97). • To assign a tone to the F button, you must change the setting value to “Tone Category” and touch the ENTER button to select a tone.
Page 96
Using the F Button Set Touch the right of the touch ring (YES) to save. A screen appears to select which user F Button Set to use as the save destination. • User F Button Sets that have already been assigned functions and saved are marked with a “ ”...
Using the F Button Set Touch the EXIT button three times to return to the “F BUTTON EDIT” screen. • Regardless of the tone selected in Step 4 above, the “F BUTTON EDIT” screen will display “Tone Category” as the setting value. When you return to the top screen after saving the F Button Set, the tone number and the first two letters of the tone name appear in the F button menu, as shown below.
Page 98
Using the F Button Set Touch the ENTER button. The F Button Set name editing screen appears. Change the F Button Set name to the desired name. • For more information on operations, see “To change a character” (page EN-35), “To insert a character”...
Using the F Button Set Erasing an F Button Set Touch the FUNCTION button to display the FUNCTION menu. Use the touch ring to select “F BUTTON SETTING” > “FB SET CLEAR”. Touch the ENTER button. A screen appears to select the F button set to erase. Touch the top or bottom of the touch ring to select the F button set to erase, then touch the ENTER button.
Using the F Button Set F Button Function List • The “Function Name” column indicates the value displayed on the “F BUTTON EDIT” screen. • The “F Button Display” column is the text that appears in the F button menu. •...
Page 101
Using the F Button Set Function F Button Function Reference Name Display “Using Chorus (Chorus, Displays the “EFFECT” screen where you Flanger, Short Delay)” Effect EFECT can select the Chorus Type and adjust (page EN-52), the Brilliance. “Adjusting Brilliance” (page EN-53) Turns the Microphone Effect on and off.
Page 102
Using the F Button Set Function F Button Function Reference Name Display “Playing Back MIDI Data or Backs up the song a little. Audio Data” Rewinds the song. (page EN-101) “Playing Back MIDI Data or Advances the song a little. Audio Data”...
Recorder to Record Performances” (page EN-107). USB flash drive songs: Standard MIDI files (SMF format 0/1) or CASIO MIDI files (CMF format) stored on a USB flash 016 to 999 MID, CMF drive can be played back without having to transfer them to the Digital Piano.
Listening to Songs (SONG Mode) ■ Audio Data The following audio data stored in the Digital Piano’s internal memory or in a USB flash drive can be played back. • WAV file (Linear PCM, 16-bit, 44.1kHz, stereo, file name extension: .WAV) •...
Page 105
Listening to Songs (SONG Mode) Select “Song Type” according to the song you want to play. (1) Touch the F4 button (STYPE). (2) Trace the touch ring to select the “Song Type” setting from the following: “MIDI” … Play MIDI data from the internal memory or a USB flash drive (MIDI Mode) “Audio(USB Drv)”...
Listening to Songs (SONG Mode) Operations While Playing Back MIDI Data Sounding Metronome While Playing Back MIDI Data In the “METRONOME” screen, turn “While Playing” to “On” to have the Metronome sound during MIDI data playback. For more information, see “Changing the Metronome Settings (Tempo, Beat, Pattern, etc.)”...
Listening to Songs (SONG Mode) Operations While Playing Back Audio Data Audio Center Cancel (Vocal Cut) Audio Center Cancel cuts (eliminates or reduces) vocals in the playback audio. Since this function cancels the center-localized sound, sounds other than vocals may also be cut. The degree of the effect depends on the audio data being played.
• CASIO COMPUTER CO., LTD. takes no responsibility for any damages, lost profits, or claims by third parties arising from the deletion of recorded data due to malfunction, repair, or for any other reason.
Page 109
Recording Performances ■ Playback Features MIDI Recorder Audio Recorder Plays back system track and solo track You can play back audio data from the internal (simultaneously or individually). memory or a USB flash drive. • With the MIDI Recorder, the Digital Piano •...
Recording Performances Using the MIDI Recorder to Record Performances The MIDI recorder records keyboard performances and pedal operations as MIDI data. Recording with the MIDI Recorder Put the Digital Piano into MIDI Mode. • Under the initial default settings, the Digital Piano is in MIDI Mode. In this case, proceed to step 2.
Page 111
Recording Performances (2) Trace the touch ring to select one of the song numbers 011 to 015. • See “NOTE” on page EN-109 for the song number of the MIDI recorder song. Touch the 0REC button. The 0REC button flashes red and the Digital Piano is ready to record. •...
Page 112
Recording Performances To end recording, touch the 0REC button. The 0REC button will show a white light once again and the SONG mode screen will appear. • If you want to immediately play back the recorded MIDI recorder song, touch the a button. •...
Page 113
Recording Performances ■ MIDI Recorder Recording Settings A MIDI recorder song has two recording tracks (system track and solo track), and you can choose which track to record to. A precount can also be set to indicate when recording will begin. Perform the operation described in steps 1 through 4 of “Recording with the MIDI Recorder”...
Recording Performances Recording a Second Track Over the First (System Track + Solo Track) You can record to one track while playing back a pre-recorded track of a MIDI recorder song. • If you make a mistake while overdub recording, you can erase and re-record the overdubbed track. For more information, see “Deleting a MIDI Recorder Song (Entire Song/Individual Tracks)”...
Recording Performances Playing Back MIDI Recorder Songs Touch the a button. The SONG mode screen appears. • If any songs have been recorded (or played) since the Digital Piano was turned on, the last song recorded (or played) will be played. To stop playback, touch the a button. •...
Recording Performances Deleting a MIDI Recorder Song (Entire Song/Individual Tracks) “Playing Back MIDI Recorder Songs” (page EN-112) operation to select the MIDI recorder song you want to erase. Touch and hold the 0REC button. The “CLEAR” screen appears. Touch the top or bottom of the touch ring to select the target (the entire song or a track) you want to erase.
Recording Performances Items Reflected in Contents When Recording to the MIDI Recorder Song The symbols below are used in the “System” column to indicate items that can be recorded to the system track, and in the “Solo” column to indicate items that can be recorded to the solo track. ✓…...
Page 118
Recording Performances Operation or Setting System Solo ✓ ✓ Part Fine Tune ✓ Scale settings — ✓ Duet settings — Metronome ✓ Tempo — ✓ Beat — *1 Operation of pedals connected to this Digital Piano *2 Not recorded depending on the function assigned to the pedal that is connected to the EXPRESSION/ASSIGNABLE jack.
Recording Performances Recording a Performance with the Audio Recorder The audio recorder records the sound output from the Digital Piano as audio data, as shown below. • Keyboard playing • Audio input from a smart device connected via Bluetooth audio (only when recording to the internal memory) •...
Page 120
Recording Performances To start recording, touch the a button. When recording starts, the 0REC button lights up red. • Recording can also be started automatically by pressing a keyboard key and starting to play. Recording can also be started with any of the following operations: −...
Page 121
Recording Performances There is no limit to the playback time of a single file (depends on USB flash drive the available capacity of the USB flash drive). MP3 format (Playback only) MP3 files of 186,046 KB or less can be played. The maximum Internal memory: playback time depends on the bit rate of the MP3 file.
Recording Performances Playing Back a Song from the Audio Recorder Touch the a button. The SONG mode screen appears. • If any songs have been recorded (or played) since the Digital Piano was turned on, the last song recorded (or played) will be played. To stop playback, touch the a button. •...
Recording Performances Deleting a Song from the Audio Recorder “Playing Back a Song from the Audio Recorder” (page EN-119) to select the audio recorder song you want to erase. Touch and hold the 0REC button. A confirmation screen will appear. To cancel the operation, touch the left of the touch ring (NO) at this point.
Adjusting Keyboard Sensitivity Changing Keyboard Response to Key Velocity (Touch Response) Touch Response alters tone volume in accordance with keyboard velocity (speed). This provides you some of the same expressivity you get on an acoustic piano. Pressing fast produces louder notes. Pressing slowly produces softer notes.
Adjusting Keyboard Sensitivity Change the value of the “Touch Response” setting. Setting value Description Disables Touch Response. Sound volume is fixed, regardless of key press speed. Makes production of a louder sound easier, so touch feels lighter than Light 2 “Normal”.
Adjusting Keyboard Sensitivity Adjusting the Timing of Key Release to Sound Damping (Key-off Response) On a grand piano, when a key is released, the damper comes down on the strings and the note is damped. The Digital Piano’s Key-off Response function simulates digitally the timing of the note damping based on how the key is released.
Changing the Pitch Changing the Pitch in Semitone Steps (Transpose) Use the transpose feature to raise or lower the pitch of all notes in semitone steps. This allows you to transpose the key of your playing to another key. Changing the Transpose Setting Select the “12 Control”...
Changing the Pitch Adjusting the Tuning Separately for Each Part (Upper 1/Upper 2/Lower) (Part Fine Tune) Each part can be individually fine-tuned between –99 and +99 cents (100 cents = 1 semitone) relative to the tuning of the entire instrument. By shifting the tuning of each part slightly, you can create a full- bodied ensemble feel.
Changing the Pitch Changing the Pitch in Octave Units (Octave Shift) Use the Octave Shift feature to raise or lower the pitch of all notes in octave units. Each part (Upper 1, Upper 2, Lower) can be set individually when using the Layer or Split functions. •...
Changing the Pitch Changing the Scale Tuning (Temperament) of the Keyboard You can change the scale of the keyboard from the standard equal temperament to another scale that is more suitable for playing Indian music, Arabic music, classical music, etc. You can select from among the 17 preset scales described below.
Changing the Pitch If necessary, change the base note of the scale. (1) In the “SCALE TUNING” screen, touch the top or bottom of the touch ring to select the “Scale Base Note”. (2) Trace the touch ring to change the desired base note. Enabling or Disabling Piano Stretch Tuning Generally, a piano is tuned so high notes are relatively higher and low notes are relatively lower.
Splitting the Keyboard for Duet Play You can split the keyboard in the center for duet play so the left and right sides have the same ranges. The Duet function is the perfect way to conduct lessons, with the teacher playing on the left side as the student plays the same song on the right side.
Page 133
Splitting the Keyboard for Duet Play Play duets using the left and right sides of the keyboard. • When Duet is active, the left and right pedals serve as damper pedals for the left and right-side of the keyboard, respectively, and the center pedal serves a damper pedal for both left and right. The strength of the pedal’s effect varies continuously with the depth to which you depress the pedal (when using the included pedal unit).
Splitting the Keyboard for Duet Play Configuring Duet Settings Select the “14 Duet” of the F Button Set. See “To change the F Button Set” (page EN-32). Touch and hold the F1 button (DUET). The “DUET” screen appears. Touch the top or bottom of the touch ring to select the item whose setting value you want to change.
USB Flash Drive Your Digital Piano supports the following USB flash drive operations. USB Flash Drive Digital Piano (1) USB Flash Drive on the Digital Piano • Playing back audio data on a USB flash drive “Listening to Songs (SONG Mode)”...
MIDI data recorded with the Digital Piano’s MIDI Recorder. (file name extension: .MRF) • CMF format (CASIO original file format): This file format adds CASIO proprietary data to MIDI data. (file name extension: .CMF) • SMF (Standard MIDI File) Format 0/1: Standard MIDI file format that can be exchanged with a compatible device from another manufacturer.
Page 137
SMF. Of course, playback will be somewhat different when played on another musical instrument. *3 Songs downloaded from the CASIO website, etc. *4 The song is loaded as a user song (song number 001 to 010). See “Data Types of Playable...
USB Flash Drive Connecting a USB Flash Drive to and Detaching It from the Digital Piano • Be sure to observe the precautions provided in the documentation that comes with the USB flash drive. • Avoid using a USB flash drive under the following conditions. Such conditions can corrupt data stored on the USB flash drive.
USB Flash Drive Formatting a USB Flash Drive Formatting a USB flash drive on the Digital Piano will create a folder named MUSICDAT in the drive’s root directory if a MUSICDAT folder does not already exist there. Use this folder when exchanging data between the Digital Piano and USB flash drive.
CASIO COMPUTER CO., LTD. shall not be held in any way liable for any use of this Digital Piano that is illegal under copyright laws.
Page 141
USB Flash Drive Touch the top or bottom of the touch ring to select the type of data to save, then touch the ENTER button. • If you choose “ALL”, after touching the ENTER button the file name edit screen will be displayed so proceed to Step 5.
USB Flash Drive Loading USB Flash Drive Data into the Digital Piano’s Internal Memory Touch the FUNCTION button to display the FUNCTION Menu. Use the touch ring to select “MEDIA” > “LOAD”, then touch the ENTER button. The “MEDIA LOAD” screen displays a menu for selecting the type of data you want to load. “USER SONG”...
USB Flash Drive Deleting a USB Flash Drive File Touch the FUNCTION button to display the FUNCTION Menu. Use the touch ring to select “MEDIA” > “DELETE”, then touch the ENTER button. The “MEDIA DELETE” screen displays a menu for selecting the types of files that can be deleted. “USER SONG”...
USB Flash Drive Renaming a USB Flash Drive File Touch the FUNCTION button to display the FUNCTION Menu. Use the touch ring to select “MEDIA” > “RENAME”, then touch the ENTER button. “MEDIA RENAME” screen appears with a menu to select the types of files that can be renamed. “USER SONG”...
Configuring MIDI Settings To change the MIDI settings of the Digital Piano, use the setting items of the FUNCTION Menu (page EN-33) listed in the table below. Setting Item Setting Values and Descriptions The keyboard channel is the MIDI channel that performance “MIDI”...
Wireless Connections The included Wireless MIDI & Audio Adaptor can be used to wirelessly connect the Digital Piano to ® external devices. This connection uses Bluetooth wireless technology, and the following two types of connections are possible: • Bluetooth Low Energy MIDI connection … Transmits MIDI data between the Digital Piano and a smart device.
Wireless Connections Touch the F1 button (ADPTR). The wireless functionality turns off. • Touching the F1 button (ADPTR) toggles the wireless functionality on and off. Notification Tones A change in the Bluetooth connection causes a notification tone to sound. This type of connection: Sounds this notification tone: Connection with a Bluetooth audio device Rising piano tone melody...
Connecting the Digital Piano and a smart device over a Bluetooth Low Energy MIDI connection enables various actions using the dedicated app. For details about the dedicated app, see “About the App for Smart Devices (CASIO MUSIC SPACE)” (page EN-149). If the Digital Piano’s wireless functionality is turned off, turn it on.
Wireless Connections Connecting the Digital Piano with a Bluetooth Audio Device Connecting this Digital Piano and an external device over Bluetooth audio allows playback from the external device over the Digital Piano’s speakers. To connect via Bluetooth audio, you must first perform a procedure called “audio pairing”...
Wireless Connections Select “WU-BT10 AUDIO” on the Bluetooth settings screen of the external device. • When pairing is complete, the indicator appears in the upper right corner of the Digital Piano’s top screen and a notification tone sounds. • Information regarding the external device connected over Bluetooth audio is registered in the Wireless MIDI &...
Page 151
Wireless Connections To delete the pairing registration information, touch the right of the touch ring (YES). “Complete” appears, and the display returns to the “WIRELESS” screen. EN-148...
This section describes the “CASIO MUSIC SPACE” dedicated app, which provides additional ways to enjoy your Digital Piano. About the App for Smart Devices (CASIO MUSIC SPACE) You can use the following functions on the Digital Piano when linked with the “CASIO MUSIC SPACE” dedicated app. • Piano Roll •...
Page 153
Using the Dedicated App Connect this Digital Piano to your smart device The available features depends on the connection method. Never connect the Digital Piano with a Bluetooth Low Energy MIDI device and a USB MIDI device at the same time. Wireless connection Cable connection Bluetooth Low...
Connecting with External Devices This section describes the connection methods that can be used without using the dedicated app (page EN-149): • Play sound from a smart device (Bluetooth audio connection) Audio playback from a smart device or other Bluetooth audio-compatible device is played through the Digital Piano’s speakers.
Connecting with External Devices Bluetooth Audio Center Cancel (Vocal Cut) Turning on Audio Center Cancel cuts (reduces or eliminates) vocals in the playback sound. Since this function cancels the central sound, it may also cut sounds other than vocals. Its effectiveness depends on the input sound.
MIDI data from your computer or a smart device to the Digital Piano and play notes on the Digital Piano. • For detailed MIDI specifications relating to this Digital Piano and the latest support information, visit the CASIO website below. https://support.casio.com/global/en/emi/manual/PX-S7000/ • For MIDI-related settings, see “Configuring MIDI...
Page 157
Start the (commercially available) music software on your computer. Select “CASIO USB-MIDI” as the MIDI device in the settings of your computer’s music software. • Refer to the user manual of the music software for information on how to select a MIDI device.
You can use MIDI standard apps when the Digital Piano is connected with a smart device. For a list of devices that can be used, please see the “Operating System Compatibility (iOS/Android)” section on the CASIO website below. https://support.casio.com/global/en/emi/manual/PX-S7000/ • We recommend using devices listed in the “Tested devices (USB-MIDI connection)” section.
Page 159
(micro B-A type) (A-B type) Launch the MIDI-compatible app on your smart device. • If you are using CASIO’s dedicated app, the smart device screen will display “Connecting...”. When a successful connection is made, the message “Connected” will be displayed. EN-156...
Connecting with External Devices Outputting Digital Piano Notes Through an Amplifier or Audio Equipment (LINE OUT jacks) You can connect audio equipment or a music amplifier to the Digital Piano and then play through external speakers for more powerful volume and better sound quality. Use commercially available cable for connection.
Connecting with External Devices Connecting to a Musical Instrument Amplifier Connecting to the LINE OUT L/MONO jack only outputs a mixture of both channels. Use commercially available cable to connect the amplifier to the Digital Piano’s LINE OUT L/MONO jack as shown in the figure below.
Deleting All Data in the Digital Piano’s Internal Memory All system contents, including data and settings, can be reset to their initial factory defaults. ■ To return all Digital Piano settings and data to their initial factory defaults (Factory Reset) •...
Troubleshooting ● The touch button does not respond. Reason: a. The buttons were touched with a fingernail or stylus. The button was touched by a user wearing a glove that is not suitable for use with touch buttons. b. The sensitivity of the touch buttons is set too low. Solution: a.
Page 164
Troubleshooting ● The pedal has no effect. a. The pedal cable is not properly plugged into the PEDAL UNIT or EXPRESSION/ Reason: ASSIGNABLE jack. Or the plug is incompletely plugged in. b. The pedal type assignment or function assignment to the jack to which the pedal is connected is incorrect.
Troubleshooting Error Messages Display Cause Action Recording of 1,000 measures or over Use the MIDI recorder to record up to was attempted with the MIDI recorder. bar 999. The recording time limit was reached Use the audio recorder to record up to Limit with the audio recorder.
Page 166
Troubleshooting Display Cause Action When recording with the audio recorder, When recording to a USB flash drive: an attempt was made to start recording Use a computer to delete all or some of beyond the maximum number of songs TAKE01.WAV to TAKE99.WAV in the (99), or the following conditions were “MUSICDAT”...
Reference Product Specifications Model PX-S7000BK/PX-S7000WE/PX-S7000HM Keyboard 88-key piano keyboard Settings Hammer Response, Key Off Response Duet Adjustable tone range (–2 to +2 octaves) Transpose –12 to 0 to +12 semitones Octave Shift –2 to 0 to +2 octaves Sound Source Number of Tones 400, Layer, Split Maximum Polyphony...
Page 168
EXPRESSION/ For connection of a commercially available expression pedal or a ASSIGNABLE jack separately available CASIO sustain pedal, selectable function (expression, master volume, tempo, layer balance, damper (off, on), sostenuto (off, on), soft (off, on), arpeggio hold (off, on), play/stop,...
Page 169
*2 Standard MIDI file (SMF format 0/1, file name extension: .MID) *3 CASIO original file format. This file format adds CASIO proprietary data to MIDI data. (file name extension: .CMF) *4 MIDI Recorder song file (file name extension: .MRF) *5 WAV format audio file (Linear PCM, 16-bit, 44.1kHz, stereo, file name extension: .WAV)
Doing so creates the risk of malfunction. • The AC adaptor cannot be repaired. If your AC adaptor malfunctions or becomes damaged, contact your original retailer or a CASIO Service Center. • AC adaptor operating environment: Temperature: 0 to 40°C Humidity: 10% to 90% RH •...
Page 171
Reference ■ Using Batteries • Close the battery case lid before using the Digital Piano. Failing to do so may cause injury. • Note that the rear of the Digital Piano around the battery compartment may become hot in use. ■...
Reference FUNCTION Menu Items Listed below are all FUNCTION menu item names and setting values and references in this manual. Some menu items can be called up directly at the touch of a button. The following information is provided in the “Reference” column of the table below, in the following manner. •...
Page 173
Reference Menu Item Setting Values Reference MIC FX (◆Touch and hold [MICFX]) “Specifying the Microphone Effect Type” Mic Fx Type Options (page EN-57) Fx On/Off On, Off “Changing Microphone Effect Settings” (page EN-58) M1 – M3 Options PORTAMENTO — “Specifying the Portamento Time”...
Page 174
Reference Menu Item Setting Values Reference “Adjusting the Volume Level, Stereo Pan and CHORUS Effects for Each Part” (page EN-60) U1 Part Send U2 Part Send 0 - 127 “List of Mixer Setting Items” (page EN-61) L Part Send KEYBOARD (◆[KEYBD]) TRANSPOSE —...
Page 175
Reference Menu Item Setting Values Reference “Changing the Sound During a Performance” PEDAL/WHEEL (page EN-62) “EXPRESSION/ASSIGNABLE jack” EXP/ASGN. PEDAL (page EN-63) (◆[PEDAL]) SW, Exp.Type1, Pedal Type “To specify the pedal type” (page EN-63) Exp.Type2 Pedal Target Options “To specify the pedal function”...
Page 176
Reference Menu Item Setting Values Reference “Selecting the Function Assigned to the CONTROL CONTROL Button” (page EN-69) (◆[CTRL]) “Selecting the Function Assigned to the Control Assign Options CONTROL Button” (page EN-69) (◆FUNCTION + CONTROL) Mod Value 0 - 127 Mod Upper1 Part “To change the Modulation settings”...
Page 177
Reference Menu Item Setting Values Reference “Saving and Recalling Performance Setups REGISTRATION (Registration)” (page EN-79) “Freeze Function” (page EN-83) FREEZE (◆Touch and hold [FREEZ]) Pedal/Wheel EX/CTRL Scale Tuning Touch Response Sound Mode Effect Off, On “Registration Memory Data” (page EN-86) Transpose Split Point Arpeggiator...
Page 178
Reference Menu Item Setting Values Reference MEDIA “USB Flash Drive” (page EN-132) WIRELESS (◆Touch and hold [ADPTR]) Notification Vol 0 - 127 “Notification Tones” (page EN-144) “Pairing the Digital Piano with a Bluetooth Audio Pairing — Audio Device” (page EN-146) “Deleting Bluetooth Audio Device Pairing Pairing Clear —...
Page 179
Reference Menu Item Setting Values Reference “Setting the Sensitivity of the Touch Buttons Touch Btn Sense –1, 0, +1 and Touch Ring” (page EN-26) “Setting the Sensitivity of the Touch Buttons Touch Ring Sense –3 - 0 - +3 and Touch Ring”...
Reference Microphone Effects List Microphone Effect Type List Listed below are the types of microphone effects and the effects contained in each module from M1 to M3 for each type. For more information on the effects listed in the M1 to M3 columns, see “List of Effects in the Microphone Effects Module”...
Reference List of Effects in the Microphone Effects Module Listed below are all the effects included in the Microphone Effects module. For details on the parameters and setting ranges that can be set for each effect, see “Parameter List of Module Effects”...
Reference Parameter List of Module Effects Effect Description Settings Parameter Display Name Mono 3-Band EQ This is a three-band monaural equalizer. EQ1 Freq EQ1 Frequency Adjusts the center frequency of Equalizer 1. EQ1 Gain EQ1 Gain Adjusts the gain of Equalizer 1. –12 - 00 - 12 EQ2 Freq EQ2 Frequency...
Page 183
Reference Effect Description Settings Parameter Display Name Limiter Limits the input signal level so it does not rise above a preset level. Limit Limit Adjusts the volume level of the limit at which 000 - 127 limiting is applied. Attack Attack Adjusts the time until the compression effect...
Page 184
Reference Effect Description Settings Parameter Display Name Chorus Gives notes depth and breadth. Rate LFO Rate Adjusts the LFO rate. 000 - 127 Depth LFO Depth Adjusts the LFO depth. 000 - 127 Waveform LFO Waveform Selects the LFO waveform. Sine, Triangle Feedback Feedback...
Page 185
Reference Effect Description Settings Parameter Display Name Ring Modulator Multiplies the input signal with an internal oscillator signal to create a metallic sound. OSC Freq OSC Frequency Sets the reference frequency of the internal 000 - 127 oscillator. Rate LFO Rate Adjusts the LFO rate.
Page 186
Reference Effect Description Settings Parameter Display Name Drive Simulates the drive of a musical instrument amplifier. Type Drive Type Selects the drive type. 1 - 20 Gain Gain Adjusts the driver input signal gain. 000 - 127 Output Level Level Adjusts the drive output level.
Reference Arpeggiator List Listed below are the Arpeggiator patterns. When the “Recommended Setup” is “On”, when the Arpeggiator is switched from off to on, or when “Pattern” is switched while the Arpeggiator is on, the “Recommended Setup” listed are automatically applied. Recommended Setup Pattern Name The Arpeggiator’s target part Split Point...
Page 188
Reference Recommended Setup Pattern Name The Arpeggiator’s target part Split Point Remarks Arpeggio (Pattern) sound Hold Upper 1 Upper 2 Lower name ✓ ✓ Up Up Down ✓ ✓ Down Down Up ✓ ✓ Sequence Line 1 ✓ ✓ Sequence Line 2 ✓...
*2: Depends on the setup of the pedal connected to the EXPRESSION/ASSIGNABLE jack. *3: For details about RPN and system exclusive messages, see MIDI Implementation at https://support.casio.com/global/en/emi/manual/PX-S7000/ *4: Depends on the EX button settings. • The MIDI messages marked with “x” in the “Transmitted” column of the above chart may be output along with certain operations.