Playing The Digital Keyboard; Turning On Power And Playing; Using Headphones - Casio CT-X870IN User Manual

Playing the Digital Keyboard

Turning on Power and Playing

1.
Press 1P (power).
This turns on power.
• To turn off power, hold down 1P (power) again.
2.
Try playing something on the keyboard. Use
2 VOLUME to adjust volume.
• If you press 1P (power) only lightly, the display will
light up momentarily but power will not turn on. This
does not indicate malfunction. Press 1P (power)
firmly and completely to turn on power.
• Turning off the Digital Keyboard causes most current
settings to be cleared. The Digital Keyboard will revert
to initial settings the next time you turn it on.
• Never try to perform any operation while the "Wait..."
or "Bye" message is on the display. These messages
indicate that an internal data save operation is being
performed. Turning off the Digital Keyboard can cause
Digital Keyboard data to be deleted or become
corrupted.
• Pressing 1P (power) to turn off power actually puts the
Digital Keyboard into a standby state. Minute amounts of
current continue to flow within the Digital Keyboard in the
standby state. If you do not plan to use the Digital Keyboard
for a long time or if there is a lightning storm in your area,
be sure to unplug the AC adaptor from the power outlet.
Auto Power Off
If you do not perform any operation on the Digital Keyboard
for about 30 minutes, power will turn off automatically.
■ Disabling Auto Power Off
You can disable Auto Power Off to ensure that power is not
turned off automatically during a concert, etc.
See Function No.70 under "FUNCTION Button (cs)
Functions" (page EN-43).

Using Headphones

Using headphones cuts off output from the built-in speakers,
which means you can practice playing even late at night
without disturbing others.
• Be sure to turn down the volume level before connecting
headphones.
• Headphones do not come with the Digital Keyboard.
• Use commercially available headphones. See page EN-3
for information about options.
• Do not listen to very high volume output over
headphones for long period. Doing so creates the risk
of hearing damage.
• If you are using headphones that require an adaptor
plug, make sure you do not leave the adaptor plugged
in when removing the headphones.
ep PHONES/OUTPUT jack
EN-9