Chevrolet 2003 Tahoe Owner's Manual page 266

Stopping and Resume Playback
To stop a disc, press and release the stop button on the
DVD player or the remote control. To resume playback,
press the play/pause button on the DVD player or
the remote control. As long as the disc has not been
ejected and the stop button has not been pressed twice,
the movie should resume play from where it was last
stopped. If the disc has been ejected, or if the stop
button has been pressed twice, the disc will resume play
at the beginning.
Ejecting a Disc
Press the eject button on the DVD player to eject
the disc.
If a disc is ejected from the player, but is not
removed, the DVD player will reload the disc within
25 to 30 seconds. The disc will then be stored in the
DVD player. The DVD player will not resume play of this
disc automatically.
DVD Messages
The following errors may be displayed on the video
screen:
Disc Format Error: This message will be displayed
if a disc is inserted upside down, if the disc is not
able to be read or if the disc format is not
compatible with the DVD player.
Load/Eject Error: This message will be displayed if
the disc is not properly loaded or ejected.
Disc Play Error: This message will be displayed if
the DVD player can not play the disc. Severely
damaged discs will cause this error.
Region Code Error: This message will be
displayed if the region code of the DVD is not
compatible with the DVD player.
No Disc: This message will be displayed if the
PLAY button is pressed and no disc is in the player.
3-1 15