Table of Contents
Advertisement
Connection using an HDMI-DVI Cable
After connecting a computer to the product with an HDMI-DVI cable, make sure to configure the settings
as shown below to enable the video and audio from the computer.
→ set each screen mode to
Picture
•
System
→
General
→ set
HDMI Hot Plug
•
Text
under
Picture Mode
to
Off
Connecting to a Video Device
• Do not connect the power cable before connecting all other cables.
Ensure you connect a source device first before connecting the power cable.
• You can connect a video device to the product using a cable.
― Connecting parts may differ in different products.
― If using the remote control, connect an external device and press SOURCE on the remote control
to select the device.
― If using touchscreen control mode, connect an external device. Next, touch and hold on the
screen when the product is turned on to display the administrator menu. Select
the administrator menu.
Connection Using an HDMI-DVI Cable
― After connecting a video device to the product with an HDMI-DVI cable, make sure to configure the
settings as shown below to enable the video and audio from the video device.
Picture
→ set each screen mode to
•
System
→
General
→ set
HDMI Hot Plug
•
HDMI IN
Text
under
Picture Mode
Off
to
Source
from
47
Advertisement
Table of Contents
