Removing And Installing A Memory Module; Dimm Population Table - Gigabyte R272-Z30 Service Manual

3-3-2 Removing and Installing a Memory Module

Before installing a memory module, make sure to turn off the computer and unplug the power
cord from the power outlet to prevent damage to the memory module.
Be sure to install DDR4 DIMMs on to this motherboard.
Follow these instructions to install a DIMM module:
1. Insert the DIMM memory module vertically into the DIMM slot and push it down.
2. Close the plastic clip at both edges of the DIMM slots to lock the DIMM module.
3. Reverse the installation steps when you want to remove the DIMM module.
2

3-3-3 DIMM Population Table

RDIMM Maximum Frequency Supported Tablel
DIMMs
Populated
1
2
1
DIMM
1R 2R
2DR
--
1
--
1
--
2
1 1
--
2
- 27 -
2
Frequency (MT/s)
1.2V
3200
3200
2933
2933
2933
System Hardware Installation