Gigabyte R272-Z30 Service Manual page 89

5-3-3-4 Memory MBIST
Parameter
MBIST Enable
MBIST Test Mode
(Note)
MBIST Aggressors
(Note)
MBIST Per Bit Slave Die
Reporting
(Note)
Data Eye
This item appears when MBIST Enable is set to Enabled.
(Note)
Description
Options available: Enabled/Disabled. Default setting is Disabled.
Options available: Interface Mode/Data Eye Mode/Both/Auto. Default
setting is Auto.
Options available: Auto/Enabled/Disabled. Default setting is Auto.
Options available: Auto/Enabled/Disabled. Default setting is Auto.
Press [Enter] for configuration of advanced items.
- 89 - BIOS Setup