Table of Contents
Advertisement
Follow these instructions to install a 2.5" hard disk drive:
1.
Press down the colored release button.
2.
Pull out the black locking lever.
3.
Use the black locking lever to slide out the HDD tray.
4.
Place one side of the HDD at a 45 degree angle into the tray, and align the guiding stand-offs in the
tray with the installation holes of the HDD.
5.
Once aligned, push down the other side of the HDD and press it until it clicks.
1
3
5
- 31 -
2
Pull
4
6
System Hardware Installation
Advertisement
Table of Contents
