AEG LP7450 User Manual page 21

1. Touch the Start/Pause
pause the appliance. The related
indicator flashes.
2. Touch the Delay Start button
repeatedly until the display shows
the desired delay time.
3. Touch the Start/Pause
again to start the new countdown.
11.8 The SensiCare System
load detection
After touching the Start/Pause
button:
1. The SensiCare System starts
estimating the weight of the load to
calculate the real programme
duration. During this phase the two
dots separating hours from minutes
are blinking
2. After about 15-20 minutes new cycle
duration is displayed.
The appliance automatically adjusts
the programme duration to the load
to achieve perfect washing results in
the minimum possible time.
11.9 Interrupting a
programme and changing the
options
When the programme is running, you
can change only some options:
1. Touch the Start/Pause
The related indicator flashes.
2. Change the options. The given
information in the display changes
accordingly.
3. Touch the Start/Pause
again.
The washing programme continues.
To start the programme
again make sure that the
programme dial is correctly
positioned on the
interrupted programme and
the indicator of the Start/
Pause button is flashing.
11.10 Cancelling a running
button to
programme
1. Press the button On/Off to cancel
the programme and to deactivate
the appliance.
2. Press the button On/Off again to
button
activate the appliance.
There is also an alternative way of
cancelling:
1. Rotate the selector knob to the
"Reset" position
2. Wait for 1 second. The display shows
.
Now, you can set a new washing
programme.
11.11 Opening the door -
Adding garments
button.
While a programme or the delay start
operates, the appliance door is locked.
The display shows the indicator
button
1. Touch the button Start/Pause
In the display the related door lock
indicator goes off.
2. Open the appliance door. If
necessary, add or remove the items.
Close the door and touch the Start/
Pause
The programme or the delay start
continues.
If the SensiCare System has
completed and the water
filling has already started,
the new programme starts
without repeating the
SensiCare System. The
water and the detergent are
not drained out in order to
avoid waste.
.
If the temperature and level
of the water in the drum are
too high and/or the drum is
still rotating you should not
open the door.
button.
ENGLISH 21
.
.