Related Manuals for AEG LP5481
Summary of Contents for AEG LP5481
- Page 1 LP5481 User Manual Washing Machine Benutzerinformation Waschmaschine USER MANUAL...
-
Page 2: Table Of Contents
17. GUARANTEE ......................32 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it. -
Page 3: Control Panel
ENGLISH 5. CONTROL PANEL 5.1 Control panel description Baumwolle Programme dial • Only rinse option Display Spin reduction touch button Delay Start touch button • No Spin option Time Save touch button • Rinse Hold option Start/Pause touch button Temperature touch button Option touch button... -
Page 4: Knob And Buttons
The digital indicator can show: • Programme duration (e. g. • Delay time (e. g. • Cycle end ( ). • Warning code ( Extra rinse indicator. It lights on when this option is se- lected . indicator blink during the laundry load detec- tions. - Page 5 ENGLISH Set this option to change the default Pour the stain remover into temperature. compartment . The stain remover will be added in the appropriate phase of The indicator = cold water of the set the washing programme. temperature comes on (the appliance does not heat the water).
-
Page 6: Programmes
In case of smaller load, touch this button 6.8 Start/Pause twice to set an extra quick programme. Touch the Start/Pause button to start, The indicator of the option and the pause the appliance or interrupt a indicator of the set value are on. - Page 7 ENGLISH Programme Programme description Maintenance cycle with hot water to clean and freshen the drum and to remove residue that may cause odour. For the Maschinenreinigung best result use this cycle once a month. Before run this cycle, remove all items from the drum. In the washing phase com- partment of the detergent dispenser, put the flap of the com- partment in upward position.
- Page 8 Programme Default tempera- Maximum spin speed Maximum load ture Spin speed range Temperature range 40 °C 800 rpm 3 kg 60 °C - Cold 800 rpm -800 rpm Daunen 60 °C 1200 rpm 60 °C 1200 rpm - 800 rpm...
-
Page 9: Settings
ENGLISH 7.2 Woolmark Apparel Care - Company for the washing of wool garments labelled as «hand wash» Blue provided that the garments are washed according to the instructions issued by the manufacturer of this washing machine. Follow the garment care label for drying and other laundry instructions. -
Page 10: Daily Use
10. DAILY USE 10.3 Filling the detergent and WARNING! additives Refer to Safety chapters. 10.1 Activating the appliance 1. Connect the mains plug to the mains socket. 2. Open the water tap. 3. Press the Ein /Aus button for a few seconds to activate the appliance. - Page 11 ENGLISH With the flap in the position DOWN: • Do not use gelatinous or thick liquid detergents. • Do not put more liquid detergent than the limit shown on the flap. • Do not set the prewash phase. • Do not set the delay start function.
- Page 12 10.6 Starting a programme 10.8 The ProSense load with the delay start detection Touch the Start/Pause button. After touching the Start/Pause button The appliance starts the countdown of the ProSense technology starts the the delay start. laundry load detection: When the countdown is completed, the 1.
- Page 13 ENGLISH If the ProSense phase is When you activate the already carried out and the appliance again, the display water filling is already show the end of the last started, the new programme selected programme. Turn starts without repeating the programme dial to set a the ProSense phase.
-
Page 14: Hints And Tips
• After 5 minutes from the end of the If you set a programme or an washing programme option that ends with water Press the Ein /Aus button to activate in the drum, the Stand-by the appliance again. function doesn't deactivate... -
Page 15: Care And Cleaning
ENGLISH 11.4 Ecological hints 11.5 Water hardness • Set a programme without the If the water hardness in your area is high prewash phase to wash laundry with or moderate, we recommend that you normal soil. additive for water softening. In areas •... - Page 16 3. Make sure that all detergent residue Always follow the is removed from the upper and lower instructions that you find on part of the recess. Use a small brush the packaging of the to clean the recess. product.
- Page 17 ENGLISH 5. When the bowl is full of water, close WARNING! the drainage duct back and empty • Do not remove the filter the container. while the appliance 6. Repeat the steps 4 and 5 until the operates. water stops to flowing out. •...
- Page 18 11. Put the filter back into the special 2. Remove the inlet hose from the guides by turning it clockwise. Make appliance by loosening the ring nut. sure that you tighten the filter correctly to prevent leakages. 3. Clean the valve filter on the back of the appliance with a toothbrush.
-
Page 19: Troubleshooting
ENGLISH values around 0° C or drop below, remove the remaining water from the inlet hose and the drain pump. 1. Disconnect the mains plug from the mains socket. 2. Close the water tap. 3. Put the two ends of the inlet hose in a container and let the water flow out of the hose. - Page 20 • - The anti-flood device is on. WARNING! Disconnect the appliance and close Deactivate the appliance the water tap. Contact the Authorised before carrying out any Service Centre. check. 13.2 Possible failures Problem Possible solution The programme does Make sure that the mains plug is connected to the mains sock- not start.
- Page 21 ENGLISH Problem Possible solution Set the drain programme if you set an option which ends with water in the tub. The spin phase does not Set the spin programme. operate or the washing cycle lasts longer than usual. Make sure that the drain filter is not clogged. Clean the filter, if necessary.
-
Page 22: Consumption Values
Problem Possible solution Make sure that you set the correct temperature. Decrease the laundry load. Too much foam in the Reduce the quantity of detergent. drum during the washing cycle. After the washing cycle, Make sure that the flap is in the correct position (UP for pow- there are some deter- der detergent - DOWN for liquid detergent). -
Page 23: Technical Data
ENGLISH Programmes Load Energy Water Approxi- Remain- (kg) consump- consump- mate pro- ing mois- tion (kWh) tion (litre) gramme ture (%) duration (minutes) 0,57 Standard 60°C cotton 0,51 Standard 40°C cotton 1) At the end of spin phase. Off Mode (W) Left On Mode (W) 0.30 0.30...