Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for AEG L 62482 NFL
Summary of Contents for AEG L 62482 NFL
- Page 1 User Manual L 62482 NFL Washing Machine...
-
Page 2: Table Of Contents
14. TECHNICAL DATA..................... 22 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it. -
Page 3: Safety Information
ENGLISH SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible if an incorrect installation and use causes injuries and damages. Always keep the instructions with the appliance for future reference. -
Page 4: Safety Instructions
If the supply cord is damaged, it must be replaced by • the manufacturer, its Authorised Service Centre or similarly qualified persons in order to avoid a hazard. Before maintenance, deactivate the appliance and • disconnect the mains plug from the mains socket. -
Page 5: Product Description
ENGLISH 2.4 Use • Do not touch the glass of the door while a programme operates. The WARNING! glass can be hot. Risk of injury, electrical 2.5 Service shock, fire, burns or damage to the appliance. • To repair the appliance contact an Authorised Service Centre. -
Page 6: Control Panel
4. CONTROL PANEL 4.1 Control panel description On/Off button (Aan/Uit) Time saving button (Tijd Besparen) Programme knob Extra rinse button (Extra Spoelen) Display Spin button (TPM) Start/Pause button (Start/Pauze) Temperature button (Temp.°C) Delay start button (Startuitstel) 4.2 Display Time area:... -
Page 7: Programmes
ENGLISH Door lock indicator: You cannot open the appliance door when the indicator is You cannot open the appliance door when the indicator flashes. Wait for some minutes before you open the door. You can open the door only when the indicator goes off. Child safety lock: The indicator comes on when you activate this device. - Page 8 Programme Maximum load Programme description Temperature Maximum spin (Type of load and soil level) range speed Mix 20° 3 kg Special programme for cotton, synthetic and mixed 20°C 1200 rpm fabrics with light soil. Set this programme to de- crease the energy consumption.
-
Page 9: Consumption Values
ENGLISH Programme Extra Tijd Be- Startuit- Spoe- stel sparen Fijne Was ■ ■ ■ ■ ■ Wol/Zijde ■ ■ ■ Centrifugeren ■ ■ Pompen Spoelen ■ ■ ■ ■ Mix 20° ■ ■ ■ ■ Jeans ■ ■ ■ ■ ■... -
Page 10: Options
Programmes Load (kg) Energy con- Water con- Approxi- Remaining sumption sumption mate pro- moisture (kWh) (litre) gramme du- ration (mi- nutes) Katoen 60 °C 1.56 Katoen 40 °C 0.90 Synthetica 40 °C 0.40 Fijne Was 40 °C 0.52 0.31 Wol/Zijde 30 °C... -
Page 11: Settings
ENGLISH Use this option for persons allergic to Some programmes accept detergents and in areas where the water only one of the two options. is soft. The related indicator comes on. 7.5 Startuitstel 7.4 Tijd Besparen With this option you can delay the start of a programme from 30 minutes to 20 With this option you can decrease the hours. -
Page 12: Daily Use
10. DAILY USE 10.1 Loading the laundry Maximum level for quantity of liquid 1. Open the appliance door additives. 2. Put the laundry in the drum, one item Flap for powder or liquid detergent. at a time. 3. Shake the items before you put them Always obey the instructions in the appliance. - Page 13 ENGLISH option, the indicator of the set option comes on. If you set something incorrect, the display shows the message Err. 10.6 Starting a programme without the delay start Press button Start/Pauze to start the programme. The relevant indicator stops to flash and stays on.
- Page 14 10.9 Cancelling the delay start 1. Press the button Aan/Uit for some seconds to deactivate the appliance. To cancel the delay start: 2. Wait for some minutes and then open carefully the appliance door. 1. Press button Start/Pauze to set the 3.
-
Page 15: Hints And Tips
ENGLISH 10.15 Draining water out after 10.16 AUTO Stand-by option end of cycle The AUTO Stand-by function automatically deactivates the appliance The washing programme is completed, to decrease the energy consumption but there is water in the drum: when: The drum turns regularly to prevent the •... -
Page 16: Care And Cleaning
11.3 Detergents and additives 11.4 Ecological hints • Only use detergents and additives • Set a programme without the specially made for washing machines: prewash phase to wash laundry with – powder detergents for all types of normal soil. - Page 17 ENGLISH 12.4 Door seal Regularly examine the seal and remove all objects from the inner part. 12.5 Cleaning the detergent dispenser 12.6 Cleaning the drain filter WARNING! Do not clean the drain filter if the water in the appliance is hot.
- Page 18 www.aeg.com...
-
Page 19: Troubleshooting
ENGLISH 12.7 Cleaning the inlet hose and the valve filter 45° 20° 13. TROUBLESHOOTING First try to find a solution to the problem WARNING! (refer to the table). If not, contact the Refer to Safety chapters. Authorised Service Centre. With some problems, the acoustic 13.1 Introduction signals operate and the display shows The start of the appliance does not occur... - Page 20 • - The appliance does not fill with • - No communication between water properly. electronic elements of the appliance. Switch off and switch on again. • - The appliance does not drain the water. WARNING! Deactivate the appliance •...
- Page 21 ENGLISH Problem Possible solution Set the drain programme if you set a programme without drain phase. Set the drain programme if you set an option which ends with water in the tub. The spin phase does not Set the spin programme. operate or the washing cycle lasts longer than usually.
-
Page 22: Technical Data
After the check, activate the appliance. The programme continues from the point of interruption. If the problem occurs again, contact the Authorised Service Centre. If the display shows other alarm codes. Deactivate and activate the appliance. If the problem continues, contact the Authorised Service Centre. - Page 23 ENGLISH...
- Page 24 www.aeg.com/shop...