Panasonic CS-NZ25VKE Service Manual page 134

18.2.1.3 To Remove Electronic Controller
5. Remove earth wires.
8. Remove screw to remove
terminal board complete.
CN-103
Figure 5
7. Detach CN-DISP connectors
from indicator complete.
Figure 3
Figure 2
9. Pull out the
electronic
controller halfway.
6. Detach lead wires
AC306 (Black)
and AC304 (Red)
from the terminal
board.
CN-WLAN
1
134
10. Detach all connectors as labelled from the
electronic controller. Then pull out the
electronic controller gently.
Figure 4
CAUTION
During assembly of PCB,
tie connector CN-103 (WHT)
together with the PCB.
AC303
CN-FM
CN-CNT
CN-STM3
CN-STM1
CN-RMT
CN-TH