How To Maintain Your Automatic Ice-Maker - Mitsubishi Electric MR-LA580ER Series Operating Instructions Manual

How to maintain your automatic ice-maker

How to maintain your automatic ice-maker
Please periodically clean to prevent the occurrence of water
scale, mold, etc. Please remove water when not making ice.
Water supply tank / Purification filter
For once-a-week
If mold forms easily in the certain types of water, clean about 2 or 3 times a week.
Take off the lid
and wash with
water.
(Temperature
tolerance
approx 60
For once-a-month
Water supply pump
Remove it from
tank.
Pipe
Water tank
Turn the pump
and take out.
Water
supply pump
Take out the pipe,
Turn the cap and remove,
Pipe
Take out the impeller
and wash with water.
Impeller
※
※ The impeller is made with a
magnetic material. Clean thoroughly
with water, making sure there
Cap
are no substances on it.
Return parts by following the
reverse procedure.
Purification filter
o
C)
Pointers for assembling the water supply pump
If it is not assembled properly, it may not make ice or it may make
a loud sound. Please check on the following.
Turn
②
Turn
Water supply pipe Tank lid
Water supply tank
Do not use a dishwasher or dryer
※
because it may cause deformation.
Remove and wash with water.
Normally, it does not need replacing.
Please replace for the following reasons:
● If something other than water was put in
and the opening got blocked.
● If it is damaged.
● If mold, etc. is forming.
The claw on the cap ( )
Impeller
is turned to put onto the
protruding part ( ) of
the water supply pump.
※ Check to make sure that
①
the impeller is inside.
Attach the water supply
Water supply tank
pump properly to the
water supply tank by
turning and attaching.
Insert the water supply pipe
into the water supply tank
opening, Connect the pipe
to the water supply pump.
※ Check to make sure that there
are no substances at the
connection point of the two pipes.
To buy another filter, please
inquire at the store where
you bought your unit.
①
②
19