Connecting To The Network Through Lan Interface; Connecting To A Wireless Lan - Pioneer BDP-140 Operating Instructions Manual

Connecting to the
02
network through LAN
interface
By connecting this player to the network via the LAN
terminal, you can play audio files stored on the
components on the network, including your computer,
using HOME MEDIA GALLERY inputs.
BDP-440
Player's rear panel
LAN cable
(commercially
available)
BDP-140
Player's rear panel
LAN cable
(commercially
available)
Connect the LAN terminal on this receiver to the LAN
terminal on your router (with or without the built-in DHCP
server function) with a straight LAN cable (CAT 5 or
22
higher).
En
Internet
Modem
Router
LAN
3 2 1 WAN
PC
LAN cable
(commercially available)
Internet
Modem
Router
LAN
3 2 1
WAN
PC
LAN cable
(commercially available)
Turn on the DHCP server function of your router. In case
your router does not have the built-in DHCP server
function, it is necessary to set up the network manually.
For details, see Setting the IP address on page 44 .
 LAN terminal specifications
LAN terminal: Ethernet jack (10BASE-T/100BASE-TX)
Note
• Refer to the operation manual of the equipment you
have as the connected equipment and connection
method may differ depending on your Internet
environment.
• When using a broadband Internet connection, a
contract with an Internet service provider is required.
For more details, contact your nearest Internet
service provider.

Connecting to a wireless LAN

Wireless connection to the network is possible through a
wireless LAN connection. Use the separately sold
AS WL300 for connection.
-
• Refer to the operating instructions of AS-WL300 for
the setting details.
BDP-440
Player's rear panel
LAN/USB feeder cable
(included with the AS-WL300)
Wireless LAN converter
(AS-WL300)
Internet
Modem
Router
WAN
DC 5V Ethernet WPS