Table Of Contents - Canon imagePROGRAF GP-300 Setup Manual

The illustrations in this manual are using the GP-300 as an example for explanation. Note that your printer may look different from these
ENGLISH
illustrations in some cases.
Overview of Setup
Set up the printer using the following procedure. If an error message appears
during setup or other problems occur, refer to "Responding to Messages" on
p. 14.
1
Removing the Packaging Material
2
Assembling the Printer Stand
3
Installing the Printer
4
Turning On the Printer
5
Installing the Ink Tanks
6
Installing the Print Head
7
Performing Print Head Adjustment
Selecting the Method of Connecting
8
to Your Computer
Installing the Software on Your
9
Computer
Loading Paper
About the Cleaning Brush
Printing From a Smartphone or Tablet
Displaying the Online Manual
Sending Information To Canon
Trademarks
Responding to Messages
Installation Space
When installing the printer, it is recommended that you secure the following
space around the printer.
Important
● The printer stand may not be included with the model you purchased.
4
Page
Please note that the required space differs depending on whether the
options are used or not.
● The space required in front of the printer varies depending on how the
4
basket is used.
Page
■
GP-300
Required space* (W x D x H)
4
Page
66.5 × 57.9 × 53.6 inches
1,689 × 1,470 × 1,360 mm
5
Page
6
Page
7.9 inches
(200 mm)
8
Page
* When using the SD-33 printer stand
10
Page
■
GP-200
Required space* (W x D x H)
11
Page
54.5 × 57.9 × 53.6 inches
1,382 × 1,470 × 1,360 mm
Required space** (W x D x H)
12 54.5 × 53.5 × 29.1 inches
Page
1,382 × 1,358 × 739 mm
13
Page
23.6 inches
13
(600 mm)**
Page
13
Page
7.9 inches
13
(200 mm)
Page
13
Page
13
Page
14
Page * When using the SD-24 printer stand
** When not using the printer stand
1
23.6 inches
(600 mm)*
11.8 inches (300 mm)
23.6 inches
(600 mm)*
11.8 inches (300 mm)
7.9 inches
(200 mm)
0.39 inches
(10 mm)**
7.9 inches
(200 mm)