Others - Panasonic MINAS A6N Series Manual

14. Others

(1) Precautions for exporting this product and equipment incorporating this product.
When the end user of this product and the end use relates to military or weapons etc., it may become subject to
export restrictions prescribed by the "Foreign Exchange and Foreign Trade Control Law", so when it is exported,
the examination and necessary export Please take a procedure.
(2) This product is designed for general industrial products etc. Do not use it in nuclear power control, aerospace
equipment, transportation equipment, medical equipment, various safety devices, devices requiring cleanliness
such as devices related to human life, special environment.
(3) Please confirm the conformity of the standards, laws, etc. in the finished equipment, and the matching of the
structure, dimensions, life span, characteristics, etc. with your equipment and parts installed at your company.
(4) Since it is possible that your completed equipment will malfunction due to malfunction of our products (signal
breakage, signal phase loss, etc.) and external noise / static electricity applied operation, so your company to
ensure safe operation within the operable range at the operation location.
(5) Since overloading of products causes load collapse, please follow the display.
(6) If the machine is operated in a state where the motor shaft is not electrically grounded, there is a risk of electric
corrosion of the motor bearing occurring depending on the actual machine and the installation environment and
the bearing sound may become large, so at your company please confirm.
(7) Tighten properly the tightening torque of the mounting screw of the product so as not to loosen or break,
considering the strength of the screw to be used and the material of the installation destination.
(8) Since there is a possibility that noise resistance performance may be influenced by the wiring situation (earth
grounding method, cable length, signal line shielding situation) etc, please check noise immunity even if placed in
your completed equipment.
(9) When discarding the servo driver / motor, please handle it as industrial waste.
(10) When disposing of the battery, please insulate the battery with tape etc and dispose according to the ordinance of
the municipality.
(11) For performance improvement or other reasons, some components of this product may be modified in a range
that satisfies the specifications given in this document.
(12) Specification change shall be made by our specifications or documents specified by your company, and if there
is an influence on function / characteristics, we will change specification after reviewing on prototype.
(13) If there is a change in the specification, the product price may change.
(14) Please contact us beforehand with items that are not described in this specification and in particular need to be
arranged.
(15) When a problem occurs, we will respond after consultation on both sides based on the items described in this
specification.
(16) There is a possibility of smoking of about 1 cigarette depending on the content of breakdown of this product.
Please note that when used in a clean room etc.
(17) Do not use benzine, thinner, alcohol, acidic or alkaline detergents as they may discolor or break the exterior.
R8.0 Motion Control Business Unit, Panasonic Corporation
No. SX-DSV03089 -91-