Operation; Pressure Relief Procedure; Setup - Graco Xtreme-Duty Agitator Operation And Parts

Operation

Operation Operation
Pressure Relief Relief Procedure Procedure
Pressure Pressure Relief Procedure
Follow the Pressure Relief Procedure
whenever you see this symbol.
This equipment stays pressurized until pressure
is manually relieved. To help prevent serious
injury from pressurized fluid such as splashing
fluid and moving parts, follow the Pressure Relief
Procedure before cleaning, checking, or servicing
the equipment.
1. Close the agitator shut-off valve.
2. Shut off the air supply to any accessories such
as feed pumps or an elevator.
Ref. Ref. Ref. Description Description Description
AR Air Restrictor (Elevator Speed)
EC Elevator Control Selector
AS Agitator Shut Off Valve
FP Feed Pump Shut Off Valve
SA Supply Air Inlet
LB Agitator Lubricator
RG Agitator Regulator and Gauge
3A4032B

Setup

Setup Setup
To reduce the risk of serious injury from moving
parts and splashing fluid, always shut off the
agitator before you raise, check, or repair the
agitator.
1. Before turning on supply air, make sure all valves
are in the CLOSED or OFF position.
a. For elevator packages, make sure that
the elevator control selector is in the OFF
position.
b. Make sure that the agitator shut-off valve is
CLOSED.
c. If using a feed pump, make sure that the
pump shut-off valve is CLOSED.
2. Turn on the air supply to the system.
Operation
13