Installation - Pentair CFIGGEN20 User Manual

Mark: The salt reading is around +/-300 ppm accuracy.
CFICGEN Dual Voltage 115V-230V Power Center:
The CFICGEN Power Center is a dual voltage power supply which means
both 115V/230V, and no wiring is required. The Power Supply converts
AC electrical current to a low-voltage DC electrical current, which is
required to produce chlorine.
The Power Center contains the transformer, needs on end of fuse,
connector to the cell, and the AC electrical current wiring configuration
with the DC electrical current output cable to the CFICGEN. A fuse is
mounted in the enclosure for additional protection. For information about
installing and proper use of the Power Center, see the "CFICGEN

installation".

WARNING:
CHLORINE GAS BUILDUP CAN OCCUR WITH
IMPROPER WIRING:
To reduce the risk of personal injury, the Power Center must be installed
on and wired to the load side of the time clock, electronically controlled
switch, or relay load side, so that it will receive power only when the pool
pump is on. Otherwise, dangerous chlorine gas buildup can occur. The
CFICGEN should never be powered when the pool pump is OFF and water
is not flowing through the unit.
Before plugging and unplugging the model, turn off the AC power to the
power center.
The CFICGEN can be used in 115v/230v, and converts them automatically.
10