Pentair CFIGGEN20 User Manual page 8

How to Add or Remove Salt
Check salt level before add or remove salt
IN-Ground POOLS: Turn the filter pump on and add the salt directly into
the pool at the shallow end.
ABOVE GROUND POOLS WITH MAIN DRAINS: Add directly in front
of the return jet to pool. Run the filter pump for 24 hours with the suction
coming from the main drain (use the pool vacuum if there is no main drain)
to allow the salt to evenly disperse throughout the pool.
ABOVE GROUND POOLS WITHOUT MAIN DRAINS: Add directly
into the pool. Brush the salt to speed up the dissolving process—to not
allow the salt to sit in a pile on the bottom of the pool. --ELIMINATE THE
FOLLOWING--(Run the filter pump for 24 hours with the suction coming
from the main drain (use the pool vacuum if there is no main drain) to allow
the salt to evenly disperse throughout the pool).
ON ANY POOL, DO NOT ADD SALT DIRECTLY TO THE
SKIMMERS OR DIRECTLY ONTO THE MAIN DRAIN. THIS WILL
SHUT DOWN OR SHORTEN THE LIFE OF THE CELL DUE TO HIGH
SALT CONCENTRATION AND REDUCED FLOW TO THE PUMP.
6