Page 2
> If you turn the screw A in a clockwise direction (blue circular arrow) the belt moves to the right, as indicated by the blue arrow. > If you turn the screw A counter-clockwise (green circular arrow) the belt moves to the left as indicated by the green arrow. bodytone.eu...
Page 3
> If you stop the belt and the front cylinder moves, the belt needs tension. > If by stopping the belt, the front cylinder is stopped, but the engine belt is turning or the engine pulley is turning, the belt needs to be adjusted. bodytone.eu...
Page 4
Once the previous processes have been carried out, we must start the machine and walk on it for about 4 km at a slow speed that will gradually increase to 10 km/hour. We will try to move all over the surface of the belt, to ensure a uniform distribution of the liquid. Tapisserie Tapisserie bodytone.eu...
Page 5
THINGS TO KEEP IN MIND BodyTone strongly recommends the use of its Bodytone lubricant for the good maintenance of your machinery or, failing that, similar products whose base lubricant is silicone and not a solvent.
Page 6
PREVENTATIVE MAINTENANCE OF TREADMILLS 2.2. SELF-LUBRICATING MACHINES All BodyTone tapes that form part of the DT series (except the DT12) are self-lubricating. Before the first use, the bottle must be emptied into the lubricant tank through the spigot provided for this purpose (it can be on the side or on top of the engine cover Some lubricant should be left in the bottle (up to the level of the lower blue strip).
Page 7
Bodytone insists that maintaining your equipment in an optimum state of cleanliness and service ennobles the image of the sports facility and the confidence of the user towards the correct functioning of the equipment.
Need help?
Do you have a question about the HOME and is the answer not in the manual?
Questions and answers