Panasonic NN­GS595A Service Manual page 18

10/24/2016
8. Draw out pump bracket from bottom rail of escutcheon base.
9. Uplift the afterbody of pump slightly to release the tabs of pump bracket, then draw out pump.
10. Pull out tube A from outlet of pump.
To install pump
1. Insert pump into pump bracket (Inlet of pump should be close to harness clasp of pump bracket).
2. Please confirm if it is fitted well after installing.
NOTE:
After repairing, when insert copper pipe into tube A, make sure the inserted depth should be no less than 9 mm to prevent
tube A from slipping.
file:///C:/Users/sh.dehghani/Desktop/NN­GS595AOTSVC_PHAMOS0511035C3/viewing/SGML_VIEW_DATA/OT/NN­GS595A/SVC/PHAMOS0511035C3/inde...
XML Service Manual
7/9