Panasonic NN­GS595A Service Manual page 16

10/24/2016
4.7 IR SENSOR
1. Disconnect connector CN5 from D.P.C. board AU.
2. Remove 1 screw holding IR SENSOR (U) on right heater panel.
To replace swing motor of IR sensor
1. Release the locking lever of connector on swing motor, then remove drive line.
2. Remove 2 screws holding swing motor on motor mounting plate.
3. Remove swing motor from IR sensor assy.
4.8 Door assembly
1. Remove left and right door key springs from door arm with plier.
NOTE:
Please support door before operation.
file:///C:/Users/sh.dehghani/Desktop/NN­GS595AOTSVC_PHAMOS0511035C3/viewing/SGML_VIEW_DATA/OT/NN­GS595A/SVC/PHAMOS0511035C3/inde...
XML Service Manual
5/9