Advertisement
Manual override
Note SSC61..
Maintenance
Repair
Disposal
Warranty
4/8
Siemens
Building Technologies
A
A
B
(Y, Y1)
(Y, Y2)
After manual override with the rotary knob the positioning signal and the stroke
synchronize autonomously, if the positioning signal is once > 9.7 V or < 0.3 V.
When servicing the actuator:
Switch off power
If necessary, disconnect the terminals
The actuator must only be commissioned with a correctly mounted valve in place!
The SSC.. actuators cannot be repaired. They must be replaced as a complete unit.
The device is considered an electronics device for disposal in terms of
European Directive 2012/19/EU and may not be disposed of as
domestic garbage.
Dispose of the device through channels provided for this
purpose.
Comply with all local and currently applicable laws and
regulations.
The technical relating to specific applications are valid only in conjunction with the
Siemens valves listed in this Data Sheet under «Equipment combinations».
The use of the SSC.. actuators in conjunction with third-party valves invalidates
any warranty offered by Siemens Building Technologies / HVAC Products.
Electrical Actuators
A
B
1
Position indicator in
position 1:
Valve OPEN
B
0
Position indicator in
position 0:
Valve CLOSED
CA1Q4895en
2016-03-24
Advertisement
