Chevrolet 2000 Astro Owner's Manual page 122

Installing a Garage Door Opener
If you have a garage door opener, the front overhead
compartment can be used to conveniently store
the opener.
1. To install the garage door opener, first open the
compartment door by pressing the latch forward.
3. Press it firmly to the back of your garage door
opener, as close to the center of the opener
as possible.
2. Peel the protective
backing from the hook
and loop patch.
4. Center the garage door opener activation button over
the console door button and press the opener firmly
into place.
5. Add one peg at a time until the garage door opener
operates with the compartment door closed when
you press the button.
The pegs inside the
compartment door
are used to make sure
the button on the
compartment door
will contact the control
button on the garage
door opener.
2-47