2.3 Key Functions
SEL key -
Table 1
OVERALL VIBRATION MODE
Bg
Bv
Table 2
BEARING STATUS MODE
Bg
Bv
VIB key -
BRG key -
When the overall velocity reading is in the Hold mode, the meter display indicates the
vibration alarm status of the machine according to ISO10816-3 as defined in section 3.
When the BRG velocity or g reading is in the Hold Mode the meter display indicates the
bearing status according to a rule-of-thumb assessment as defined in section 4.
QM014 Issue 5
Press SEL to switch-on the meter.
In the Overall Vibration mode press SEL to toggle through the
measurement parameter options:
Measurement units - specified on order
Metric 1
g rms
µm pk-pk
Measurement units - specified on order
Metric 1
g rms
m/sec rms
Press VIB to toggle between Measure and Hold modes. The Hold
mode is indicated by an 'H' in the display.
In the BRG mode press VIB to enter the Overall Vib. Mode.
In the Overall Vib. Mode press BRG to enter the Bearing Status
mode.
In the Bearing Status measurement mode press BRG to toggle
between this and the Bearing Status hold mode indicated by an
'H' on the display.
- 5 -
HS-620/630 User Guide
Metric 2
Imperial
m/sec
rms
g rms
2
µm pk-pk
mil pk-pk
Metric 2
Imperial
m/sec
rms
g rms
2
mm/sec rms
in/sec rms