Table of Contents
Advertisement
2. Operating Instructions
BNC connector
LCD Screen
BRG Key
VIB Key
2.1 Sensor Connection
Fit the vibration sensor to the machine measurement position via a magnetic base or stud.
Connect the sensor cable to the BNC connector on the meter. When a satisfactory sensor
connection is made, the sensor fault icon on the LCD display will disappear. Conversely,
the sensor fault icon will appear if the meter detects a poor sensor connection.
2.2 Power On/Off
Power On - Push SEL key only for " sec. The meter defaults to the overall vibration
velocity range.
Power Off - Push two keys, SEL + BRG or SEL + VIB for 1 sec.
The meter will power-off on release of the keys.
The meter will automatically power-off after 3 minutes of no key operation.
QM014 Issue 5
SEL Key
Figure 1. The VBA20
- 4 -
HS-620/630 User Guide
Integral Cable
Hand Probe
with Sensor
Advertisement
Table of Contents
