Disc Brake Inspection (Depending On Models) - Sym Joyride S 125i Owner's Manual

DISK BRAKE INSPECTION
(Leak, damaged, looseness of brake line)
• Visual check brake lines for leakage, or damage, check
brake lines connections for looseness using a wrench or
similar tool, and check whether steering handle vibration
in driving, or any parts' interference may have damage
the brake lines. If so, bring your scooter to your
SANYANG dealer for repairing or service.
CAUTION:
• Please drive your scooter on a dry road surface slowly and operate front and rear brakes in order to
find out if there is any malfunction so as to ensure the scooter is at its optimum condition and safe to
ride.
﹙Checking front brake lining﹚
•
Check the brake from behind the brake caliper.
The brake pad must be replaced with new
lining when the brake pad wear limit reaches
the brake disk.
﹙Replenishment of front wheel brake fluid﹚
1. Loosen the screws and remove the master cylinder
cover.
2. Wipe clean foreign materials , dirt around the
reservoir, being careful not to let foreign materials
fall into the reservoir.
3. Remove the diaphragm plate and the diaphragm.
4. Add brake fluid to upper level.
5. Install the diaphragm plate and the diaphragm, and
install the master cylinder cover.
6. Please note the diaphragm direction, and do not let
foreign materials fall into the reservoir. And tighten
the master cylinder cover securely.
(Applicable for model equipped with disk brake.)
Brake caliper
Brake pad wear
limit grooves
Brake disk
10.Inspection and Maintenance Before Riding
Hose connection
﹙Checking oil quantity in brake oil reservoir﹚
• Park the scooter on a level ground, and check
if fluid level is under the "LOWER" mark.
Recommended Brake Fluid: BRAKE OIL (DOT
3 or DOT 4).
Screw
Master
cylinder cover
Diaphragm
17
Upper
Brake fluid