Table of Contents
Advertisement
EN
AS3X Control Response Test
This test ensures that the AS3X control system is
functioning properly. Assemble the aircraft and bind your
transmitter to the receiver before performing this test.
1. Raise the throttle to any setting above 25%, then
lower the throttle to activate AS3X technology.
CAUTION: Keep all body parts, hair and loose
clothing away from the propeller, as these items
could become entangled.
2. Move the entire aircraft as shown and ensure the
control surfaces move in the direction indicated in
the graphic. If the control surfaces do not respond as
shown, do not fly the aircraft. Refer to the receiver
manual for more information.
Once the AS3X system is active, control surfaces may
move rapidly. This is normal. AS3X remains active until the
battery is disconnected.
Center of Gravity
The CG location is 25mm back from the leading edge
at the wing root. This has been determined with the
recommended 1S 150mAh 3.7V Li-Po battery installed in
the middle of the battery cavity.
8
Aircraft movement
22-28mm
AS3X Reaction
UMX Radian
Advertisement
Table of Contents
