Table of Contents
Advertisement
Front Parking/Turn Signal Lamps with
Composite Headlamps
1.
Remove the screws and
take out the parking/turn
signal lamp assembly.
2. Squeeze the tab on the side of the lamp socket while
turning the socket to the left.
3. Pull the socket out of the
lamp assembly.
4. Push in gently on the bulb, turn it to the left and
remove it from the socket.
5. Put the new bulb in the socket, gently press in on the
bulb and turn it to the right until it is tight.
6. Put the socket back into the lamp assembly and turn
it to the right until it locks.
7. Put the parking/turn signal lamp assembly back into
the vehicle and tighten the screws.
.
6-39
Advertisement
Table of Contents
