Advertisement
6.3
Tilt Adjustments
Tilt adjustments usually do not require
loosening any bolts or screws. The tilt
plate fasteners have been pre-adjusted for
easy adjustment with most TVs. However,
heavier TVs may sag due to the extra
weight.
Manually adjust the display to your
preferred angle, then evenly tighten the
lock nuts on each side of the arms using
the 10mm socket wrench to prevent the
display from sagging.
7.
Attach Bezel
Attach the four pieces of the bezel
by securing the tabs on the rear
of reach piece to the inside of the
enclosure. Each bezel piece is
secured by two screws (N).
Pg. 8
Advertisement
